Skip to main content

Export layout data from Layout manager

Modified: 8 Apr 2026 Tekla Structures 2026
2026
Tekla Structures

You can use Layout manager to export layout data from your model.

You can first export the layout data from Layout manager to a file and move the file later to a layout device, such as Trimble® LM80. You can also export layout data from Layout manager to Trimble Connect. Alternatively, you can export a file directly to a layout device. You can do this if you connect the layout device to your computer using a USB, or with a Bluetooth connection.

Export layout data

  1. On the Manage tab, click Layout manager.
  2. If needed, check from the Settings that the default export settings are as intended, and modify the settings if needed.
  3. Select the group that you want to export.

    The points in the group are exported according to the group local coordinate system. The local coordinates of the points are shown in the export dialog.

  4. In Layout manager, click Export.
  5. Select the file type for the export.
    • Export point file (.txt) to export layout points.

    • Export CSV file (.csv) to export layout points.

    • Export job file (.cnx) to export all layout data in the model to Trimble® LM80.

    • Export Field Link file (.tfl) to export all layout data in the model to Trimble FieldLink.

    • Export Field Link file (.tflx) to export all layout data in the model to Trimble FieldLink (from version 6.3 onward).

    • Export Trimble Connect (.tflx) to export all layout data in the model to Trimble Connect.

    Note that in addition to Trimble devices, other layout devices can also read in the .txt, .csv, and .cnx file types.

    Note:

    The layout points that you create in the model are design points that you can export to use in a layout device.

    The maximum length of the layout point name is 16 characters if you export layout data to .cnx , .tfl, and .tflx formats. When exporting to a text file (.txt) or a CSV file (.csv), there is no limitation in the number of characters in the name. The maximum length of the description is 24 characters.

  6. Select the destination folder or project.

    If a suitable folder or project does not exist, create one to export the layout data.

  7. Select the file to export.

    When exporting to Trimble Connect enter a name for the export file without the file extension.

  8. Select the coordinate system for the export from the Export local coordinate system list.
    • The Export local coordinate system list shows the base point of the group. You can change the coordinates by selecting another option from the list.
  9. If needed, select a drawing in Map file (.dxf) when exporting a job file (.cnx) or a Trimble FieldLink file (.tfl). You can attach a layout drawing when exporting these file types.

    You can use a layout drawing with the layout point data in a layout device. To ensure that the drawing is exported correctly, you need to define the drawing scale.

  10. Click Export to export.

Define default export settings

You can define the default settings that are used when you are exporting point files (.txt), CSV files (.csv), and Trimble LM80 job files (.cnx.

  1. On the Manage tab, click Layout manager.
  2. Click Settings .
  3. Click Point File to define the export settings for point files (.txt):
    1. Select the unit.
    2. Select the delimiter.
    3. Define the order of column headers in point files. Select a header in the list and click the Move up or Move down button.
  4. Click CSV File to define the export settings for CSV files (.csv):
    1. Select the unit.
    2. Define the order of column headers in point files. Select a header in the list and click the Move up or Move down button.
  5. Click Trimble LM80 to define the default Length unit for Trimble® LM80 job files (.cnx).

    You can select to export as meters, feet-inches, or survey feet.

  6. Click Save.

Define the drawing scale

You can include a drawing when exporting all layout data in a job file or a field link file from Layout manager by adding the drawing to the Map file (.dxf) box in the export dialog. The drawing is exported in the .dxf or .dwg format. To ensure that the drawing is exported correctly, you need to define the drawing scale.

  1. Create a general arrangement (GA) drawing of your model.

    We recommend that you make the drawing as simple as possible, only include parts and grids to show the drawing correctly in a layout device. You might want to create a drawing layout especially intended to be used in Layout manager export.

  2. Open the drawing that you are going to use as a drawing layout.
  3. Double-click the drawing view frame to open View properties.
  4. Copy the drawing scale.
  5. Close the drawing.
  6. On the Manage tab in the model view, click Layout manager.
  7. Click the Drawing scale calculator button.
  8. Enter the drawing scale in the Scale Denominator (e.g. 48, 128) box.
  9. Click Calculate.

    The drawing scale is shown in the Scale box.

  10. Copy the drawing scale from the Scale box and close the Drawing scale calculator dialog.
  11. On the File menu, click Export > Drawings .

    Tekla Structures opens the Document manager dialog and the Export drawings as DWG/DXF dialog.

  12. In the Document manager dialog, select the drawing that you want to export.
  13. In the Export drawings as DWG/DXF, do the following:
    1. In File location, select the export folder.
    2. Select the Drawing as snapshot to CAD model space checkbox.

      The Scale box is shown.

    3. Enter the drawing scale in the Scale box.
  14. Click Export.

Create reports for layout points

You can create reports for the layout points that you select in Layout manager. You can use layout point reports for reporting accurate out-of-tolerance deviation data between design points and measured points, for example.

  1. In Layout manager, select the layout points or groups for which you want to create the report.
  2. In Layout manager, click Report .
  3. Enter a name for the report file.

    By default, the report file is saved as a .csv file in the \Layout\Reports folder under the current model folder. Select another folder if needed.

  4. Click Save.

You can open and import the report in Microsoft Excel, for example.

Tip:

You can also use custom attributes for reporting out-of-tolerance deviation data in part marks in drawings.

Submit

Table of Contents