You can create completely new fixed profiles or create copies of existing fixed profiles. You can also convert parametric profiles into fixed profiles.
Create a fixed profile in the new profile catalog
You can create fixed profiles with a single cross section or with multiple cross sections.
Cross sections affect the total weight of the profile.
If you create a profile with multiple cross sections, create the cross sections with the same number of corner points and in the same order.
Example
For a pitched profile, you need two cross sections with the same center point height. The Relative location value is 0.0 for the first cross section, 0.5 for the second cross section, and 1.0 for the third cross section.
Create a fixed profile in the original profile catalog
You can create fixed profiles with a single cross section or with multiple cross sections.
Cross sections affect the total weight of the profile.
If you create a profile with multiple cross sections, create the cross sections with the same number of corner points and in the same order.
Example
For a pitched profile, you need two cross sections with the same center point height. The
Relative location value is
0.0 for the first cross section,
0.5 for the second cross section, and
1.0 for the third cross section.
Create a fixed profile by copying an existing profile
You can create new fixed profiles by modifying a copy of an existing, similar profile.
Create a fixed profile based on a parametric profile
You can convert an existing parametric profile into a fixed profile.
- On the File menu, click to open the Modify Profile Catalog dialog box.
- Select a parametric profile from the list.
- Right-click, then select Add Profile.
A new standard fixed profile is created with the profile values of the parametric profile.
Modify a fixed profile
If necessary, you can modify existing fixed profiles.
The fixed profiles conform to industry standards. Only administrators should modify them.
You can use these tabs to modify different types of information about fixed profiles:
-
The General tab contains information about profile types and dimensions.
-
The Analysis tab contains information about the properties used in structural analysis. The structure can be analyzed with different analysis software.
-
The User attributes tab is for viewing or entering user-defined attributes for profiles.
- On the File menu, click to open the Modify Profile Catalog dialog box.
- Select a fixed profile
to modify its properties.
- (Original profile catalog only) When you have finished modifying the profile, click Update.
- Save the changes to the profile catalog.