|
Object properties
|
-
On the ribbon, click
Object.
-
Select an object.
Tekla Structures displays the object properties in
a separate window.
|
|
Point coordinates
|
-
On the ribbon, click the down arrow next to , and
then select Point coordinates.
The Inquire point coordinates dialog box is displayed.
-
Click Pick, and then pick a point in the model to see the
coordinates of the point in:
- Local coordinates
- Model coordinates (global)
- Project base point coordinates
- Current base point coordinates
|
|
Center of gravity
|
-
On the ribbon, click the down arrow next to , and
then select Center of gravity.
-
Select one or more parts or
reinforcement objects.
Tekla Structures creates a point at the center of
gravity of the selected objects, and displays
information about the center of gravity in a separate
window.
|
|
Object properties using custom reports
|
See Custom inquiry.
|
|
Welded parts
|
-
On the ribbon, click the down arrow next to , and
then select Welded parts.
-
Select a part.
Tekla Structures highlights the selected part and
all the parts that are welded to it.
|
|
Primary welded parts
|
-
On the ribbon, click the down arrow next to , and
then select Primary welded part.
-
Select a part.
Tekla Structures highlights the primary part when
you select a secondary part.
|
|
Assembly, cast unit, or rebar assembly
objects
|
See Check and highlight objects in an assembly, Check and highlight objects in a cast unit,
or Check and highlight objects in a rebar assembly.
|
|
Component objects
|
-
On the ribbon, click the down arrow next to , and
then select Component objects.
-
Select a component.
Tekla Structures highlights all objects belonging
to the selected component.
|
|
Rebar set layers
|
-
On the ribbon, click the down arrow next
to , and
then select Rebar set layers.
-
Select a rebar set.
Tekla Structures displays a separate window where
you can check which rebar sets affect the selected rebar
set, and which rebar sets are affected by the selected
rebar set.
For example, you can review the layer
order number, concrete cover thickness, additional
offset, and layer thickness at each leg face or leg
surface of the selected rebar set.
If you
select a row with a GUID in the list, Tekla Structures highlights the corresponding
rebar set in the model.
Alternatively, you can first select a
rebar set in the model, and then click on the
contextual toolbar.
|
|
Phases
|
On the ribbon, click the down arrow next to , and then
select Phases.
Tekla Structures displays information about objects in
different phases in a separate window.
|
|
Model size
|
On the ribbon,
click the down arrow next to , and then
select Model size.
Tekla Structures displays the quantity of all objects in
the current model in a separate window.
|