Floor Tool creates a floor bay with optional insulation.
Objects created
-
Hollow core slabs
Use for
|
Situation |
Description |
|---|---|
|
|
Floor bay with insulation |
Selection order
Make sure that you have defined the slab properties.
-
Pick the contour points of the floor bay.
The floor bay is automatically created when you close the polygon.
The list of picked contour points on the Bay contour tab and the list of slabs on the Slab list tab are created when the slabs are created.
Slab properties tab
Use the Slab properties tab to control the profile, material and location of the hollow core slabs.
Slab attributes
|
Option |
Description |
|---|---|
|
Profile |
Define the profile by selecting it from the profile catalog. |
|
Name |
Define a name for the slab. |
|
Material |
Define the material grade by selecting it from the material catalog. |
|
Class |
Define the part class number. |
|
Prefix |
Define the part prefix. |
|
Start number |
Define the start number for the cast unit. |
|
Cut slab ends |
Define whether the slab ends are cut or not. If you select Yes, define the minimum end angle for the slabs. |
|
Rotation |
Select an option to rotate the slab. |
|
Vertical location |
Define the offset location in the vertical direction. |
|
Offset |
Define the offset in the vertical direction. |
|
Minimum end angle |
Define the minimum end angle for the slabs. If the line to which the slab ends has a bigger angle than the defined minimum end angle, the part will be aligned to the line. |
Additional attributes
|
Option |
Description |
|---|---|
|
Exposure Class |
Define the exposure class for the hollow core slab. The exposure class will be saved as a user-defined attribute. |
|
Relative strength |
Define the relative strength of the hollow core slab. The relative strength will be saved as a user-defined attribute. |
|
Fire rating |
Define the fire rating for the hollow core slab. The fire rating will be saved as a user-defined attribute. |
|
User-defined attributes |
User-defined attributes are located in the FloorTool.ini file. |
Slab direction
|
Option |
Description |
|---|---|
|
Slab direction |
Define the direction of the slab. If you select Angle, you need to pick points in the model to define the new direction. The angle you have picked is shown in the Angle field. You can also define the angle directly in the field to rotate the slabs. Note that picking two points does not change the local +X direction. |
Insulation tab
Use the Insulation tab to control the insulation properties of the hollow core slabs.
First define whether to create insulation or not. Insulation is created separately for each slab.
Insulation
|
Option |
Description |
|---|---|
|
Name |
Define a name for the insulation. |
|
Material |
Define a material grade by selecting it from the material catalog. |
|
Thickness |
Define the thickness of the insulation. |
|
Class |
Define the part class number. |
|
Offset at slab start/end |
Define the offset between the slab start/end positions and the corresponding positions in the insulation parts. |
|
Left/Right offset |
Define the offset between the slab and the insulation for the rightmost and leftmost slab. |
Bay contour tab
Use the Bay contour tab to control the coordinates of the picked contour points and the horizontal offset of the lines connecting the contour points. If the coordinates are not visible on the tab, click the Get button.
You need to create the hollow core slabs before using the Bay contour tab.
Bay contour properties
|
Option |
Description |
|---|---|
|
XY-constant Z |
Define the Z coordinate for all contour points at the same specific height. |
|
XYZ (sloping floor) |
Define the Z constant for each contour point separately. The floor may be sloped. |
|
Offset method |
Define the offset method. |
|
Default end offset |
Define the default end offset. |
|
Default side offset |
Define the default side offset. |
Bay contour table
The table lists the contour points showing their X, Y, and Z coordinates. You can modify the Z coordinate in the table only if you have selected XYZ (sloping floor). You can modify the Horizontal offset on all rows of the table.
The table also shows the lines connecting the points. You can only modify the Horizontal offset. Entering a positive value enlarges the slab area and entering a negative value shrinks the slab area.
Slab list tab
Use the Slab list tab to list all the hollow core slabs created. If the slab list is not visible on the tab, click the Get button.
Slab properties
|
Option |
Description |
|---|---|
|
Slab number |
Shows the order of the hollow core slabs starting from the first picked point. |
|
Width |
Shows the width of a narrowed slab. |
|
Narrowed from |
Define whether the slab is narrowed. The options are:
|
|
Type |
Define the slab type.
|
|
Profile |
Define the profile by selecting it from the profile catalog. |
You can Add and Delete slabs, and move them Up and Down in the list by using the buttons on the left. To restore the default values, click Restore defaults.