Skip to main content

Split a rebar set

Modified: 22 Sep 2026 Tekla Structures 2026
2026
Tekla Structures

You can split rebar sets into two rebar sets. The rebar sets to split can have leg faces or leg surfaces.

You may need to split a rebar set when you want to add only a portion of it into a rebar assembly, for example.

Rebar sets with leg faces can be split in any direction.

Limitations:

  • Splitting only works with rebar sets that have one or two straight guidelines. If you try to split a rebar set that has more than two guidelines or a curved guideline, Tekla Structures shows a message saying "The object cannot be split in this position".

  • Rebar set leg surfaces cannot be cut. If a rebar set has leg surfaces, splitting only works perpendicular to the guideline (=parallel to the bars). Tekla Structures copies the rebar set that has leg surfaces to the same location and adjusts the spacing values of both rebar sets so that the bars on different sides of the splitting line belong to their own rebar sets. Creation method is changed to By exact spacings for both rebar sets.

  1. On the Edit tab, click Split.
  2. Select the rebar set that you want to split.
  3. Pick the first point for the splitting line.
  4. Pick the second point for the splitting line.

When a rebar set is split into two:

  • The two input points are projected onto the nearest leg face to define a plane, which is then used for splitting the rebar set.

  • When needed, the rebar set modifiers and cuts are copied to the new rebar set, which is created as a result of the split.

  • The leg faces of the existing rebar set are cut at the split plane, and new leg faces are created for the new rebar set.

Submit

Table of Contents