Pasar al contenido principal

Perfil en CDG (80)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Construsoft European
South America
Spain

Image
thumbnail.png

 

System component Profile in COG (80) can be used to create a profile in the cog (center of gravity) of a part/assembly/cast unit.

Back to top

Objects created

  • COG profile
Back to top

Use for

SituationDescription
Image
use for.png
COG profile will be placed in the COG of the cast unit in this example.
Back to top

Before you start

Create a part/assembly/cast unit.

Back to top

Selection order 

  • Activate the component.
  • Select the part/assembly/cast unit.
  • Press middle mouse button.
Back to top

Part identification key

Image
use for.png

 

 Part
1COG profile

 

Picture tab

Image
tab picture.png

 

Tab Picture can be used to define how the center of gravity is determined.

 

OptionDescription
1Define the length of the COG profile.
2

Options how to determine the center of gravity (COG). The options are:

● Parts. COG of main part.

● Whole cast unit. COG of cast unit.

● Whole cast unit minus embeds. COG of cast unit minus embeds.

● Assemblies. COG of assembly.

3

The options are:

● Yes.

● No.

4

Extra rotation of COG profile. The options are:

● No.

● Around X.

● Around Y.


Example: 

Image
goc example.png
5

Position UCS. The options are:

● Use global xy-plane.

● Use local.

Parts tab

Image
tab parts.png

 

Tab Parts can be used to define the properties of the cog profile.
 

OptionDescription
1The profile to be used in COG. Can be a plate but a profile is possible as well.
2

Define how to connect the COG-profile to the part/assembly/cast unit. The options are:

● Cast unit. Cast unit the part to the concrete part.

● Weld. Weld the part to the steel part/assembly.

● Part add. Use option part add to "glue" the COG-profile to the part/assembly/cast unit.

● Sub-assembly. Create the COG-profile as sub-assembly.

● No action. Do nothing, COG-profile is not connected to any part.

3Rotation, any value can be defined here in order to rotate the COG-profile.
4A second profile can be created in the COG.
5

Define how to connect the second profile to the first profile. The options are:

● Cast unit. Cast unit the part to the concrete part.

● Weld. Weld the part to the steel part/assembly.

● Part add. Use option part add to "glue" the COG-profile to the part/assembly/cast unit.

● No action. Do nothing, COG-profile is not connected to any part.

6Rotation of the second profile, any value can be defined here in order to rotate the second COG-profile.
7Offset of the start point of the second profile.
8Offset of the end point of the second profile.
9Also the option to use a custom component part instead of a profile.
OptionDescriptionStandard
Profile 1 and 2Thickness (t) and width (b) of profile 1. Also, the prefix and the start number, material, name, class and comment can be defined.  
Pos_No

Prefix and start number for the position number of the plate and in the second row where prefix and start number of the assembly number can be defined. Only used when the gusset plate is not welded.

The default start number of the part is defined in the menu File > Settings > Options.
MaterialMaterial of the gusset plate.The default material is defined in the File > Settings > Options.
NameThe name displayed in drawings and reports. 
ClassThe class (color) of the profile. 
CommentComment displayed in drawings and reports. 

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Enviar