Skip to main content

BW Eaves Beam to Stanchion (132)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

The BW Industries' Eaves Beam to Stanchion connection will define a fixing bracket according to the set of parameters specified with either standard or non-standard stooling dimensions. The joint will define all bolts and welds required, and where appropriate will also fit the ends of the eaves beams to leave the correct end gap.
 

Before and after

Image
tekla-structures-bw-132-before.png
 
Image
tekla-structures-bw-132-after.png

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • When connection is applied the default connecting profile is always an L70*70*8, this can be overwritten in the Parts tab. 

Selection order example

  1. Column
  2. Eaves Beam
  3. Eaves Beam
  4. Click middle mouse button
Image
tekla-structures-bw-132-selection-order.png

See also

BW cold rolled - Important information
BW Eaves Beam to Stanchion (132) - Parts tab
BW Eaves Beam to Stanchion (132) - Parameters tab
BW Eaves Beam to Stanchion (132) - Bolts tab
Submit