Column panel (11)
On this page
System component Column panel (11) is used to create a connection between a concrete column and 2 panels above each other.
Objects created
- Column anchor
- Panel anchor
- Connection profile
- Bolts
- Cuts
Use for
| Situation | Description |
|---|---|
|
Image
| Connection between a concrete column and 2 panels above each other. |
|
Image
| Detail of the connection between a concrete column and 2 panels above each other. |
Before you start
Create a column and next to it two panels above each other
Back to topSelection order
1. Select the main part (column).
2. Select the first and the second panel.
The connection is created automatically.
Picture tab
In the "Picture" tab, the dimensions, the concrete cover thickness, and the offsets are defined.
| Option | Description |
|---|---|
| 1 | Side view. |
| 2 | Top view. |
| 3 | Define the offset of the connection from the top panel. |
Anchors tab
In the "Anchors" tab, parameters, attributes, and positions are defined for column anchor and panel anchor.
| Option | Description |
|---|---|
| 1 | Define attributes for column and panel anchor. Options:
Select the type of anchor connection to the concrete part. Options for panel anchor:
Options for column anchor:
Decide, how the anchor should be created. Options:
If you want to use a custom part to create the anchor, select the component and use the options to position the custom part. |
| 2 | Define the position in the plane. Options:
Define the rotation. Options:
Define the position in depth. Options:
Select the orientation of the anchor. Options:
Decide, how the anchors should be created in the concrete part. Options:
|
Conn profile tab
In the "Conn profile" tab, parameters, attributes, and positions are defined for the connection profile.
| Option | Description |
|---|---|
| 1 | Define attributes for connection L profile. Options:
Select the type of connection to the concrete part. Options:
Decide, how the connection profile should be created. Options:
If you want to use a custom part to create the anchor, select the component and use the options to position the custom part. |
| 2 | Define the position in the plane. Options:
Define the rotation. Options:
Define the position in depth. Options:
Select the orientation of the connection profile. Options: Image
When the last option is selected, the dimension can be defined as well. |
| 3 | Decide, whether the connection profile should be created as a libr profile or a folded profile. When the option "folded profile" is selected, the right flange, left flange and thickness can be defined. |
Bolts tab
In the "Bolts" tab define the parameters and dimensions of panel anchor bolts and column anchor bolts.
| Option | Description |
|---|---|
| 1 | For the panel anchor and column anchor bolts, the following parameters can be defined:
Decide, how the bolt should be created. Options:
Decide about the bolt direction. Options:
|
| 2 | Define the offset and number of panel anchor bolts. Define the rotation angle of the column anchor bolt. |
Cuts tab
In the "Cuts" tab, the dimensions and shape of cuts are defined.
| Option | Description |
|---|---|
| 1 | Decide, from which line (middle axes or side edges) will be the panel offset counted. Options:
|
| 2 | Decide, which side of the panels will be displayed according to the plane perpendicular to the column. Options:
|
| 3 | Decide, how the side should be cut when the panels are positioned at an angle to the column. Cut options:
|
About tab
In the "About" tab, general information about the extension and the developer can be found.
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.