Skip to main content

Thomas Panels Cold Rolled Sleeved (120) - Parts tab

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

Use the Parts tab in the Thomas Panels and Profiles Cold Rolled Sleeved Properties panel to control the member properties of the items created by the joint.

Image
tekla-structures-tpp-120-parts-tab.png

 

OptionDescriptionDefaultOther
Cleat ProfileThis specifies the profile to be used for the cleat where the standard manufacturer's cleat is not to be used. That cleat, and its associated data is defined in the data files. To specify an alternative cleat you may either enter the name of any profile stored in the profile database or use a parametric profile to create the required profile for the cleat.Standard manufacturer's cleat from the data files. 
Cleat AssemblyThis sets the assembly prefix for the cleat defined in the joint.The default is set to CR. 
SleeveThis specifies the profile to be used for the sleeve where the standard manufacturer's sleeve is not to be used. The sleeve, and its associated data is defined in the data files. Please contact Tekla Structures support if you need to add any extra ones.Standard manufacturer's sleeve from the data files. 
Sleeve AssemblyThis sets the assembly prefix for the sleeve defined in the joint.The default is set to CR. 
Stay Profile
This specifies the profile to be used for the stay where the standard manufacturer's stay is not to be used. The stay, and its associated data is defined in the data files. Please contact Tekla Structures support if you need to add any extra ones.
Standard manufacturer's stay from the data files. 
Stay AssemblyThis sets the assembly prefix for the stays defined in the joint.The default is set to CR. 
Stay Plate, tThis sets the thickness of the plate to the rafter / stanchion used with the rafter stays.This value will come from the data files. 
Stay Plate, bThis sets the width of the plate to the rafter / stanchion used with the rafter stays.This value will come from the data files.
Image
tekla-structures-parts-tab-stay-plate-b.png
Stay Plate, hThis sets the length of the plate to the rafter / stanchion used with the rafter stays.This value will come from the data files.
Image
tekla-structures-parts-tab-stay-plate-h.png
Stay Cleat ProfileThis specifies the profile to be used for the stay cleats. To specify stay cleats you may either enter the name of any profile stored in the profile database or use a parametric profile to create the required profile for the stay cleat.If no profile name is entered the stays will be assumed to be connected to the rafter using stay plates. 
Stay Cleat LengthThis specifies the length of the stay cleats defined in the joint.This value only applies if a valid stay cleat profile name has been given in the field above. 
Pos_No
(Part position number)
The part position number consists of a prefix and a start number.
1. Prefix
2. Start number
Some connections have a second row for the part position number where you can enter the assembly position number.
The part position number defined in the connection dialog box overrides the settings defined in the components settings in File menu --> Settings --> Options.
Image
tekla-structures-parts-tab-pos-no.png
MaterialThis is the material grade that will be used for all the parts within the connection.The default value for this is taken from ‘Setup Preferences: Joint part material’ 
NameThe profile name cannot be amended.  

See also

Thomas Panels cold rolled - Important information
Thomas Panels Cold Rolled Sleeved (120)
Thomas Panels Cold Rolled Sleeved (120) - Parameters tab
Thomas Panels Cold Rolled Sleeved (120) - Stays tab
Submit