Salta al contenuto principale

Split panel (26)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Construsoft European

Image
thumbnail

 

You can use system component Split panel (26) to split an existing concrete panel by adding a horizontal seam. In the background, the existing panel is replaced by two new parts.

Back to top

Objects created

  • No objects are created.
Back to top

Before you start

  • Created a wall.

 

Picture tab

You can use tab Picture to define the spilt level of the wall.

Image
tab picture

 

OptionDescription
1Seam thickness.
2Option to adjust the wall thickness.
3Several options for defining dimensions.
4Defining the (level) dimension.
5

The options for the level dimension are:  

Image
option 1 2 3
  1. Seam centre.
  2. Top side lower wall.
  3. Bottom side top wall.

 

Combine tab

You can use tab Combine to define the prefix for the new generated panels.

Image
tab combine

 

Configuration 2 tab

You can use tab Configuration 2 to add an extra rotation to the new generated panel and to display information axis and geometry profiles.

Image
tab config 2

 

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
tab about

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Invia