Salta al contenuto principale

Wood wall on panel (m082)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific
Construsoft European
Image
001

 

You can use the tool Wood wall on panel (m082) to position a timber frame wall on the outer shape/contour of a solid (concrete) shape.

In some cases, the full contours (both external and internal) of the wooden elements to be generated are known. For example, because they were generated in the engineering phase as a simple solid (concrete) form. In other cases, this shape has already been determined in other software and imported as a reference model in Tekla Structures using an IFC file. In that case, these volumes can be quickly converted to actual timber frame elements using the tool Wood wall on panel (m082).

Objects created

  • Timber frame construction walls

Use for

SituationDescription
Image
Wood_wall_on_pannel_008
Straight walls without opening
Image
Wood_wall_on_pannel_007
Straight walls with openings
Image
Wood_wall_on_pannel_006
Non-rectangular walls

Before you start

Create a concrete wall.

Selection order

  1. Select the concrete wall to be converted to a timber frame construction wall.

Settings tab

Image
003

 

OptionDescription
Wood wall attribute (m057)

Settings created in component Wood wall (57) can be loaded here to create timber frame construction walls using the settings of component Wood wall (57).

Image
004
Origin for 057 is based on

It is possible to indicate the origin of the wall. 

Options:

  • Start point:
    The Start point (yellow point) of the timber frame construction wall coincides with the start point (yellow point) of the concrete wall. 

    Image
    Wood_wall_on_pannel_004
  • End point:
    The End point (magenta point) of the timber frame construction wall coincides with the start point (yellow point) of the concrete wall. 

    Image
    Wood_wall_on_pannel_005

As can be seen in the examples above, this also affects the Insertion plane.

Insertion plane

Define on which side of the solid form the wooden frame must be aligned. The position in the depth can be defined in Wood wall (57) is also of influence here. 

Options:

  • Middle
  • Front
  • Behind
Filter on selected objectWhen using a crossing to select the different solid volumes in the model, a selection filter can also be used. In this way, different selections within the model can easily be converted to actual timber frame construction elements but using different settings from Wood wall (57).
Create on selected objectsIf a selection is made, and the above options are defined, they can be applied to the objects in the selection.

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
005

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA. 

Invia