Salta al contenuto principale

Seam anchors (m031)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Construsoft European

Image
thumbnail

 

System component Seam anchors (m031) can be used to create the connection between 2 panels using custom components.

Back to top

Objects created

  • Custom components, containing gains, anchors, dowels.
Back to top

Use for

SituationDescription
Image
use for.png
Profiles created by custom components are created to connect the 2 panels.
Back to top

Before you start

Create 2 panels on top of each other having a certain gap/seam.

Back to top

Selection order 

  • Activate the component.
  • Select the panel below.
  • Select the panel above.
  • The component will be created.
Back to top

Part identification key

Image
part identification key

 

 Part
1Anchor
2Dowel
3Gain

 

Picture tab

Tab Picture can be used to define the position of the anchors and gains.

Image
tab picture

 

OptionDescription
17 options to define the positions of the parts in the longitudinal direction of the panels.
2Two distances can be defined here which will be used in option 1.
3

Anchors left/right/both. The options are:

● Both anchors.

● Only left anchor.

● Only right anchor.

Note: Once the number is defined in tab Extra, you will get more connections.

4

Eccentricity. To define the position of the connections perpendicular to the plane of the panels. The options are:

● Middle elem1.

● Right elem1.

● Left elem1.

● Middle elem2.

● Right elem2.

● Left elem2.

5See 4, option to define extra offset.

More anchors tab

Tab More anchors can be used to define the number of connections. In the examples below we have defined the option "Both anchors" in tab Picture.

Image
tab extra

 

OptionDescription
1

A distance can be defined in order to get an extra connection. E.g. 200 is defined, the result looks like this:

Image
example 1.png

 

But also 3*150 is possible. , the result looks like this:

Image
Example 2.png
2Option to define the needed number of extra connections in between.
3See 1, but in this situation not on the left side but on the right side.

Joints tab

Tab Joints can be used to select the custom components you want to use to connect the panels.

Image
tab joints

 

Custom Component Part tab

Tab Custom Component Part can be used to define the custom component and their settings as well. Also, the orientation can be affected.

Image
tab cucopa

 

Tab Welding

Image
tab welds

Click the link below to find out more:
Create welds

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
tab about

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Invia