メインコンテンツに移動

How to include a structure’s masonry veneer in its effective seismic weight

Tekla Structural Designer - Not version-specific seismic masonry veneer loading veneer
Not version-specific
Tekla Structural Designer
Environment
Not environment-specific

Buildings often feature external masonry veneers that are self-supporting and laterally anchored to the structure. Despite being self-supporting, the weight of the masonry must still be considered in the effective seismic weight of the structure.

 

If it is required to include a structure's self-supporting masonry veneer in its effective seismic weight, then one approach within Tekla Structural Designer that engineers can consider is as follows:

 

  1. Create a loadcase for the masonry veneer with the load type marked as Dead and leave the Include in Generator checkbox unchecked. This will allow the load combinations to be created without including the masonry veneer dead load since only the effective seismic weight of the veneer is desired. 

 

                            

Image
Masonry Veneer loadcase

 

 

  1. With the masonry veneer dead load case selected, apply a Uniform Distributed Load along the perimeter beams to account for the effective weight of the masonry wall on the structure at each level. 
Image
TSD model screenshot with masonry veneer loading

                            

  1. Run the Seismic Wizard, inputting the required seismic parameters of the structure. On the Effective Seismic Weight, include the Masonry Veneer loadcase in the effective seismic weight. 

     

Image
Masonry Veneer effective seismic weight

                                           

  1. Finish the Seismic Wizard. Create both gravity and seismic load combinations as required. Note that if the Generate load combinations button is used, the masonry veneer load case will not be included in the load combinations since the setting to include the loadcase in the generator was unchecked. 
  2. Perform an Analyze All (Static) on the model. 
  3. Run a Seismic Design Report. Review the Effective Seismic Weight in the report. It can be confirmed that the masonry veneer is being included in the effective seismic weight by reviewing a Loadcase Summary report. Sum up the reactions from all loadcases included in the effective seismic weight (including the masonry veneer load case), and subtract half of the column and X-brace self-weight from the base to the first level. This sum will equal the effective seismic weight found in the Seismic Design Report.
Image
Loadcase reaction results

 

Image
Seismic Design Report

                                    

 

                                    

送信

Table of Contents