Seam anchors (31)
System component Seam anchors (31) can be used to create the connection between 2 panels using custom components.
Back to topObjects created
- Custom components, containing gains, anchors, dowels.
Use for
| Situation | Description |
|---|---|
|
Image
| Profiles created by custom components are created to connect the 2 panels. |
Before you start
Create 2 panels on top of each other having a certain gap/seam.
Back to topSelection order
- Activate the component.
- Select the panel below.
- Select the panel above.
- The component will be created.
Part identification key
| Part | |
|---|---|
| 1 | Anchor |
| 2 | Dowel |
| 3 | Gain |
Picture tab
Tab Picture can be used to define the position of the anchors and gains.
| Option | Description |
|---|---|
| 1 | 7 options to define the positions of the parts in the longitudinal direction of the panels. |
| 2 | Two distances can be defined here which will be used in option 1. |
| 3 | Anchors left/right/both. The options are: ● Both anchors. ● Only left anchor. ● Only right anchor. Note: Once the number is defined in tab Extra, you will get more connections. |
| 4 | Eccentricity. To define the position of the connections perpendicular to the plane of the panels. The options are: ● Middle elem1. ● Right elem1. ● Left elem1. ● Middle elem2. ● Right elem2. ● Left elem2. |
| 5 | See 4, option to define extra offset. |
Extra tab
Tab Extra can be used to define the number of connections. In the examples below we have defined the option "Both anchors" in tab Picture.
| Option | Description |
|---|---|
| 1 | A distance can be defined in order to get an extra connection. E.g. 200 is defined, the result looks like this: Image
But also 3*150 is possible. , the result looks like this: Image
|
| 2 | Option to define the needed number of extra connections in between. |
| 3 | See 1, but in this situation not on the left side but on the right side. |
Joints tab
Tab Joints can be used to select the custom components you want to use to connect the panels.
Custom Component Part tab
Tab Custom Component Part can be used to define the custom component and their settings as well. Also, the orientation can be affected.
Configuration tab
Tab Configuration can be used to Print Info.
| Option | Description |
|---|---|
| 1 | To print the info, select the required option. The options are: • No Image
In case this view doesn't pop-up, please go to |
About tab
Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.
Welds
Click the link below to find out more:
Create welds
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.
Back to top