Przejdź do treści

Sloping Slabs

Tekla Structures - Not version-specific plattenmodellierer sloping slab slope slab modeler
Not version-specific
Tekla Structures
Environment
Switzerland

Back to top

Purpose and description

This extension enables user to create fully parametric sloped slabs. You can create slabs, add splitlines, manage openings and also create automatic connections to walls or columns above or below the slab. You can simply modify the geometry by dragging points or enter a new height for specific points.

Back to top

System requirements

This extension is only available for maintenance customers of BuildingPoint Switzerland.
This extension needs Tekla Structures 2020 or newer.
The ribbon-icon will only be presented by using Tekla Structures 2020 SP2 onwards.

Back to top

Installing Sloping Slabs

You can download Sloping Slabs on Tekla Warehouse.
After the installation, you will find the extesions in the ribbon in tab SWISSTOOLS or in the component catalog:
 

Image
image.png
Back to top

Using Sloping Slabs

Create a Slab

To create a slab, simply click the points of the slab and press middle mouse button to close. Your Slab will then be created with it's current settings.
You can use the dialog menu for editing by clicking twice on the component. In the dialog you can set values like Name, Material, Finish or Thickness of the slab. Activate parallel slab? to have a constant thickness instead or a horizontal bottom-level.
 

Image
image.png



In the Sidepane, you can also set settings for slab attributes. You have the choice to set them manually or use a saved standard-file from Slab-Object to use as a template.

Image
template files.png

Modify a slab

Modify the contour of a slab by dragging one of the yellow contour points. Use direct modification to place the point at the correct location.
 

Image
image.png


Furthermore:
 

Image
image.png
  1. If you want to add more points to the contour, use add contourpoints to display the "add point"-symbol in the center of each edge.
  2. Modify if the slabs bottom-surface should be horizontal or following the top-surface with a specific height. 

Use of splitlines

Use either add splitline or add polyline to add splitlines to the slab.
 

Image
image.png


Whereever two splitlines are crossing, a yellow handle will be generated. You can drag the point to move it with the use of direct-modification. By clicking on the point, the direct-modification-toolbar with show a value where you can input the needed absolut height of that point.
 

Image
image.png


By pressing Delete on your keyboard, the point and according splitlines will be deleted.

Use of openings

You can define openings inside the slab. Note that due to current limitations, it's not possible to use openings and connections to walls or columns together.
 

Image
image.png


To delete an opening, press delete opening, click inside an opening and press delete.

Insert connection

You can insert automatic connections between the slab and parts like walls or columns above or below. Click on the slab and go to Tab Connection in the sidepane. Choose wether you want to connect parts above or below the slab.

Image
image.png

Copy a slab

If you copied a slab with normal copy-functions, you may need to update the slab to get actual height-values of the points. Just click on the slab and click Modify in the sidepane.

Back to top

Known limitations

  • Using the Connection above or below slab will only work if there is no opening in the slab.
Back to top
Zachowaj