Passar para o conteúdo principal

Anchor Rods

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

Anchor Rods allows you to create anchor rods for any base plate with bolts. It allows you to create anchor rods for base plate components (system components, custom components, plug-ins), manually created base plate and bolt groups. Anchor Rods works differently with the component selection option and part selection. Those are expained in the Usage section.

How to locate

Anchor Rods will be available in the Applications & components catalog under Anchor Rods after the installation.

  

Image
image.png

 

Double-click the component to open the dialog box to edit the required properties.

 

Usage

Click the component thumbnail image or the component name in the Applications & components catalog to activate the tool. It can work in different ways.

  • Select components selection switch (Component selection mode):

 

Image
image.png

In the component selection mode, select a base plate component (system component/custom component/plugin). Anchor Rods will create anchor rods at all the bolt positions as a nested component. Bolts convert to bolt holes automatically.

  • Select objects in components selection switch (Part selection mode):

 

Image
image.png

In the part selection mode, first select a part and then a particular bolt group attached to it. Anchor rods will be created at each bolt position. In this case, you need to change the input bolts to holes from the bolt properties. If there are multiple bolt groups, you have to apply the plug-in multiple times to achieve the required result.

Anchor rods dialog box 

There are two tabs in the Anchor Rods dialog box:

  • General 

  • Plates

General

Image
Anchor rod general page

 

 

1. Parts of anchor rod

Define the part properties here. Anchor rod assembly number prefix and start number are used as assembly prefix and start number for the assembly.

2. Cast plate 

Define the cast plate here. To create the cast plate, set the cast plate thickness to something other than zero. The cast plate has a separate assembly prefix. The default cast plate thickness is zero.

3. Grout

To create a grout, set the thickness to something other than zero. The grout has a separate assembly number and it can be filtered out if not required in reports.

4. Plate prefix

You can change the plate prefix from the default value by selecting an appropriate value from the list. The default value is the project default plate prefix.

5. Anchor type 

You can change the anchor type to custom part by selecting the option from the list. If you select custom part, instead of creating anchor rods from the settings in Anchor Rods dialog box, you can insert a predefined custom part with an appropriate attribute file name.

6. Anchor dimensions

Define the anchor dimensions, projections, thread length, anchor rod shape, gaps and profile for headed anchors etc here. You can control the gap between the plate and the washer, and it can be used for maintaining similar assembly number for the anchor rods applied to base plates with different thicknesses. From version 2.1 onwards, an option of making the anchor rod top projection from top/bottom of the baseplate is available.

7. Anchor orientation 

Select a suitable anchor orientation and flip. These options work for custom parts as well.

8. Assembly handling of entire anchor group

By default, the entire anchor group is handled as a single assembly. With the option No, a separate assembly is created for each anchor rod set.

9.Anchor rod set assembly handling

Manage the entire creation and assembly for anchor sets here.


 

Image
image.png


The table below lists items and their defaults in order from top to bottom

 

Item Creation default Assembly default 
Lock nut No No
Nut1 No No
Washer1 No No
Plate washer 1 No No
Plate washer 2 No No
Washer2 No No
Nut2 (for cast plate) No No
Nut3 (for cast plate) No No
Nut4 No No
Extra Plate No No
Nut5 No No

 


10. Other options

Plate holes tolerance is meant for all the holes created for plates, such as plate washer, cast plate, and shim plate.
Anchor delete list helps you to delete an anchor from a bolt position. Enter anchor numbers separated by commas to do this.

Plates

 

Image
image.png

 

Fitting plates

 

Define the fitting plates or level plates for base plates here. To create a fitting plate, at least set the thickness to something other than zero and a value for the Number of Fitting plates option. 

Fit plate hole type

Select the hole type: round, slotted horizontal, or slotted vertical.

Limitations

If input contains a contour plate, sometimes the grout does not work properly. In that case, try reversing the bolt from the input plugin component or from the bolt properties, and then use the flip option from this extension to control the vertical orientation of the anchor.

Tips

  • If there are grout holes (used bolt as grout holes) in the base plate component, you have the following options to avoid creating anchor rods in the grout holes:

  • Option 1: Go for component selection. Avoid creating anchor rods by giving a delete list of bolt positions.

  • Option 2: Go for part selection, then select the base plate, and then the bolt group required to be anchor rods. If there are multiple bolt groups other than the grout hole, repeat the process again.

  • Option 3: Explode the component, and proceed as in Option 2.

  • If the base plate is not a component then it is just a plate and bolt groups, and you can directly use Option 2 (make sure that the selection mode is part selection).

Note: Use Option 2 if different parameters are required for different sets of anchor rods (example: Bolt dia, orientation etc.).

Examples:

(a) Anchor rods applied on PEB Baseplate of Pre-Engineered Building Tools (https://warehouse.tekla.com/#/catalog/details/u44e27181-da63-423f-87c4-e48bdf46499b). If the anchor rods are reversed by following the bolt group orientation, flip it with the flip option.

 

Image
image.png

(b) Working with different bolt groups

 

Image
image.png

 


In the part selection mode, select bolt group 1 first. And then the second. Here, change the properties of anchors, if required. See the output below.
 

 

Image
image.png

 

Enviar