To ensure that each submittal to the fabricator contains valid and up-to-date information, you can use the Validate Tekla PowerFab submittal tool at any stage of your detailing process.
You can validate model parts, profiles, materials, and finishes, and the numbering, drawing, PDF file, and NC file statuses of parts and assemblies.
Validate fabricator settings
You can use the Validate Tekla PowerFab submittal tool before submitting parts to Tekla PowerFab for estimating and procurement to check if the profiles, materials, and finishes in the model match the fabricator database.
- Before you can validate the model, you must select the fabricator in . See Fabricator settings.
- If a profile is available from the fabricator but does not exist in the Tekla Structures profile catalog, it is not listed.
The table lists the parts grouped by profile, material, and finish. These three properties come from the fabricator settings.
Any changes made by the fabricator are automatically updated in the fabricator data in Tekla Structures.
To check the material, profiles, and finishes, do the following:
When all the materials and finishes are correct, you can continue to submit to Tekla PowerFab for estimating and procurement. See Submit to fabricator.
Validate production content
Before submitting to Tekla PowerFab for approval and fabrication, on the Production content tab, you need to validate the steel parts and assemblies.
You validate to ensure that the objects you want to submit have the following:
- up-to-date numbering
- drawings in the Document manager
- up-to-date PDF files of the drawings
- up-to-date NC files of the parts

next
to the box.
.
.