跳转到主要内容

Release Info Tekla Structures 2025

Tekla Structures 2025
2025
Tekla Structures
Environment
Construsoft European

The Release Info Tekla Structures 2025 includes the following topics:

General

Tekla Structures 2025 videos

Tekla Structures 2025 includes many new options and improvements that are explained in this Release Info.

 

Image
logo_2025_2

 

In addition, instructional videos are available for several functionalities.

Click here for the new features shown in brief.

Flat bar conversion: file fltprops.inp

When you model plates in Tekla Structures, these are automatically converted to flat bars when you number the model.

In the model, the flat bars with the notation PL (or PLT) retain this prefix, but in the output files (lists, drawings, NC files, etc.) the notation will be changed to FLAT.

If desired, you can disable this "flat bar conversion" via the advanced option XS_USE_FLAT_DESIGNATION (via File > Settings > Advanced options category Plate work).

 

The flat bars that need to be available to you are defined in the file fltprops.inp located in the folder

..:\TeklaStructures\2025.0\Environments\ConstrusoftEuropean\General\Profil:

 

Image
RI_2025_enu_001a

 

This flat bar table is arranged as follows:

First row: the available flat bar thicknesses.

Second row: the flat bar widths correspond to the first flat bar thickness (here 3 mm).

Third row: the flat bar widths correspond to the second flat bar thickness (here 4 mm).

Fourth row: the flat bar widths correspond to the third flat bar thickness (here 5 mm), etc.

 

The material quality of the plates is not considered by default.

However, to assign certain flat bar sizes to a specific material quality, you can use the following notation:

 

Image
RI_2025_enu_048a

 

PlateMaterial

3x20, 3x25, 3x30

4x20, 4x25, 4x30, 4x40

All materials

5x16, 5x20, 5x25, 5x30, 5x40, 5x50

6x20, 6x25, 6x30, 6x35, 6x40, 6x50

S235

8x20, 8x25, 8x30, 8x35, 8x40, 8x45, 8x50

10x20, 10x25, 10x30, 10x35, 10x40, 10x45, 10x50

12x20, 12x25, 12x30, 12x35, 12x40, 12x45, 12x50

S275JO

You can adjust the file fltprops.inp as needed, and the modified file can also be saved in the model folder so that a specific flat bar table can be used for each model (customer).

 

Click here for more information about the conversion of plates to flat bars.

Extended command Display & filtering

The side pane in Tekla Structures includes the command Display & filtering (1) in which various tabs (2) are available by default:

 

Image
RI_2025_enu_020

 

Assembly hierarchy: To display the hierarchy of assemblies, nested assemblies and super assemblies.

Phases: To display different phases in model views.

Name: To display different names of model objects.

Attributes: To display different attributes.

 

In the Display & filtering command, you now have the new option Combine with phase filter:

 

Image
RI_2025_enu_021

 

This allows you to combine options in the Phases tab with options in the Name tab or any of the other options (to do this, right-click on the Name tab):

 

Image
RI_2025_enu_022

 

For example, in a Tekla Structures model in which UNP140 profiles appear in multiple phases, you can create a combination that displays, for example, only the UNP140 profiles that are in phase 2.

 

Entire Tekla Structures-model:

 

Image
RI_2025_027a

 

Display only phase 2:

 

Image
RI_2025_enu_023

 

Display only UNP140 profiles:

 

Image
RI_2025_enu_024

 

Combined, so only the UNP140 profiles in phase 2:

 

Image
RI_2025_enu_025

 

Click the Help button for detailed information about the usage of the Display & Filtering command.

New custom properties available

Tekla Structures includes many custom properties. 

A custom property is an intelligent and dynamic property, which can be applied in filters, reports and templates.

 

In Tekla Structures 2025, the new custom property CUSTOM.CS_HAS_CONICAL_BENDS is available that allows you to filter sheet metal work. For a practical example, see chapter Interoperability > New STEP export for sheet metal work.

Also a new custom property CUSTOM.CS_PHASE_COUNT is available. This property returns the number of different phases in which a particular part or assembly occurs.

The following new custom properties can be used to inquire values related to the current phase (marked with "@" in the Phase Manager):

 

Image
RI_2025_enu_026

 

CUSTOM.CS_CURRENTPHASE_NUMBERReturns the number of the current phase.
CUSTOM.CS_CURRENTPHASE_NAMEReturns the name of the current phase.
CUSTOM.CS_CURRENTPHASE_PART_COUNTReturns the number of parts in the current phase.
CUSTOM.CS_CURRENTPHASE_ASSEMBLY_COUNTReturns the number of assemblies in the current phase.
CUSTOM.CS_CURRENTPHASE_BEAM_COUNTReturns the number of beams in the current phase.
CUSTOM.CS_CURRENTPHASE_CONTOURPLATE_COUNTReturns the number of contour plates in the current phase.
CUSTOM.CS_CURRENTPHASE_POLYBEAM_COUNTReturns the number of polybeams in the current phase.
CUSTOM.CS_CURRENTPHASE_SPIRALBEAM_COUNTReturns the number of spiral beams in the current phase.
CUSTOM.CS_CURRENTPHASE_BENTPLATE_COUNTReturns the number of bent plates in the current phase.
CUSTOM.CS_CURRENTPHASE_LOFTEDPLATE_COUNTReturns the number of lofted plates in the current phase.

Also, custom property CUSTOM.CS_PART_ROTATION has been added. This property is used to display the value entered for part Rotation in the part properties dialog in model views:

 

Image
RI_2025_enu_027

 

This uses a separate color for each option (front, top, back, bottom) in order to display the orientation of parts so that you can quickly check them in model views.

When you double-click on a model view, you can define the color and transparency of parts in the model view in the field Color and transparency in all views in the Window Properties dialog box:

 

Image
RI_2025_enu_028

 

This is where you set how parts are displayed.

The rotation assembly and rotation part options have now been added here:

 

Image
RI_2025_enu_029

 

Image
RI_2025_enu_030

 

In the Tekla Structures model:

 

Image
RI_2025_enu_008

 

Checking the orientation of parts in model views is important because the orientation of the (main) part determines how the part or the assembly is positioned in the workshop drawing.

Example

Two beams have been modeled and a purlin is added to both beams with system component Stub (1011).

For the beam with the rotation top, the purlin is positioned on top of the beam by default. For the beam with the rotation below, the purlin is positioned at the bottom of the beam by default.

By setting the direction in the dialog box of system component Stub (1011) to +z, the purlin is (forced) positioned on top of the beam with the rotation below:

 

Image
RI_2025_enu_031

 

This results in the following assembly drawings.

The beam with the rotation top:

 

Image
RI_2025_enu_009

 

The beam with the rotation below:

 

Image
RI_2025_enu_010

Localization: Update personal settings/files

General about localization

When you switch to Tekla Structures 2025 as a Tekla Structures user, you can use the settings and files that you modified in a previous Tekla Structures version. Tekla Structures will not copy them automatically, you must do it yourself.

There are some settings/files that we will highlight because these are customizations that you may have made in an earlier Tekla Structures version and cannot be copied to Tekla Structures without any further action.

Compare them to your situation and, if necessary, take the steps that apply to you. This allows you to start working in Tekla Structures 2025 quickly and easily.

It is recommended that you document your own changes by documenting them and using this Word document as a basis, supplemented with your personal points of attention. In that way you always know what your adjustments are.

Update model templates

In case you have created model templates in earlier Tekla Structures versions, you must update the model templates to use them hassle-free in Tekla Structures 2025.

Click here for a general step plan.

Changes in model templates

Tekla Structures includes several model templates that you can use as a basis when creating new models:

 

Image
RI_2025_enu_032

 

The availability of the model templates depends on the selected role when you start Tekla Structures.

These model templates include various settings that you use as examples when creating new models.

The big advantage of using model templates is that, when you have created a model using a model template and open it again later, all settings are (still) correct so that the model is displayed correctly. After all, no profiles, bolts, etc. are missing because this is all stored in the model folder.

Several changes have been made in Tekla Structures 2025 regarding model templates.

 

Multiple paths for model templates

You can now define multiple paths for the location for model templates with the advanced option XS_MODEL_TEMPLATE_DIRECTORY.

The advanced option XS_MODEL_TEMPLATE_DIRECTORY is located in the "role"-file which you work with in the folder

C:\TeklaStructures\2025.0\Environments\ConstrusoftEuropean:

 

Image
meerdere_padnamen_lokatie

 

and refers to the folder where the model templates are located, for example, for the Steel Detailer role, the location is set as follows:

 

Image
verwijzing_meerdere_padnamen

 

In Tekla Structures 2025, in the role files role_Multimaterial_Detailer.ini and role_All.ini, the location to multiple path names is set:

set XS_MODEL_TEMPLATE_DIRECTORY=

%XSDATADIR%\environments\Construsofteuropean\Engineering\ModelTemplates\;%XSDATADIR%\environments\Construsofteuropean\Steel\ModelTemplates\
 

..so that reference is made to all available model templates.

 

Model template Steeldrawings old style

Since some Tekla Structures versions, you have the ability to define settings for objects in drawing views. This includes how parts are displayed or dimensioned in the different views.

For the roles Precast Concrete Detailer and Timber Detailer, this was already possible in some Tekla Structures versions, and since Tekla Structures 2024, in the role Steel Detailer role, you have the model template Steeldrawings old style, in which settings for objects in drawing views are defined.

In Tekla Structures 2025, the model template Steeldrawings old style is not available anymore, so you will only have the new settings for objects in drawing views.

Click here for the example model Steel drawings old style if you still want to use the old drawing settings.

 

Examples

Click here for two elaborated steel-related examples.

Modified reports

For all reports showing areas, two decimal characters are now set:

 

Image
RI_2025_enu_033

 

In addition, dummies are now filtered out so they are no longer displayed. In earlier Tekla Structures versions this was not consistent in the relevant reports, now it is the same everywhere.

The list id_finish has been replaced by the list id_no_conservation so that the name of the list matches the application of the list.

Changes in the advanced option XS_INP

In earlier Tekla Structures versions, the folder

..:\TeklaStructures\<version>\Environments\ConstrusoftEuropean\General\Inp

included many different types of content.

To bring more structure to this, some files from this folder have been moved to other folders.

  • Configuration files for the IFC export that were previously stored in the folder General\Inp, have been moved to the folder General\Collaboration\IFC.
  • The *.clb files (profile definitions) previously stored in the folder General\Inp, have been moved to the folder General\Profil.

 

The file env_ConstrusoftEuropean.ini

Following the above changes, the following change is made to the file env_ConstrusoftEuropean.ini:

set XS_INP=%XSDATADIR%\environments\construsofteuropean\General\Inp\;%XSDATADIR%\environments\construsofteuropean\General\Collaboration\IFC\;%XSDATADIR%\environments\construsofteuropean\General\Profil\

 

If you have defined this advanced option in any *.ini file, then add the two references shown above to the value, so that, for example, no settings for IFC export and profiles are missing in Tekla Structures.

The customized ribbon and shortcuts

You can copy your customized ribbon and shortcuts, after installing Tekla Structures 2025, from an older Tekla Structures version to Tekla Structures 2025.

Copy the ribbon

You can copy your customized ribbon from an earlier Tekla Structures version to Tekla Structures 2025.
 

NOTE: If you copy your customized ribbon, new available (in Tekla Structures 2025) command buttons will be missing.

You can also first compare the "old" ribbon with the new "standard" ribbon in Tekla Structures 2025 via File > Settings > Ribbon > Compare in both Model and Drawing Editor.

You will see the differences between your customized ribbon and the "default" Tekla Structures 2025 ribbon.

You can now choose to add the missing command buttons or to use the new default ribbon.

You can do next to copy your customized ribbon:

1. In the Windows Explorer, go to the folder (depends on the Tekla Structures-version)

C:\Users\<user>\AppData\Local\Trimble\TeklaStructures\<older version>\UI\Ribbons\
 
or the folder

C:\Users\<user>\AppData\Local\Trimble\Tekla Structures\<older version>\UI\Ribbons\
 
2. The *.xml file: albl_up_<license>--main_menu.xml contains the customized ribbon.
3. Copy this *.xml file in the folder C:\Users\<user>\AppData\Local\Trimble\Tekla Structures\2025.0\UI\Ribbons.

Note that the ribbon file name is determined by the Tekla Structures configuration you are using. For example, for the Steel Detailing configuration, the file name albl_up_Steel_Detailing - main_menu.xml is used. Because there are three new configurations available in Tekla Structures 2021, the following table shows the available configurations and their file names:

 

Image
RI_2025_enu_002

 

* New in Tekla Structures 2021. These options are only available if you have a subscription.

Click here for more detailed information about copying the ribbon.

Click here for more information about comparing the changes between a customized ribbon and the original ribbon.

Copy shortcuts

To copy shortcuts from an earlier Tekla Structures version to Tekla Structures 2025:

1. In an earlier Tekla Structures version, go to File > Settings > Keyboard shortcuts.

2. Click on the button Export, save the *.xml file on the desired location with the desired name.

3. In Tekla Structures 2025, go to File > Settings > Keyboard shortcuts.

4. Click on the button Import, select the *.xml file and click on the button Open, the shortcuts are now imported.

You can copy the exported *.xml file to any computer and next import the file into Tekla Structures 2025.

Customized Applications and components catalog

In Tekla Structures you have the possibility to customize the Applications and components catalog, such as creating your own groups, adding subgroups, or customizing the order of groups.

 

Image
RI_2025_enu_011

 

In Tekla Structures, the Applications and Components catalog (the groups Concrete through Reinforcement) is stored in separate *.xml files in the folder

..:\TeklaStructures\2025.0\Environments\ConstrusoftEuropean\General\ComponentSettings:
 

Image
RI_2025_053

 

Because the groups are stored separately, the Applications and components catalog is easy to maintain by group and you can easily exchange groups. For example, when you have added your own group to the Applications and components catalog, you can publish (export) this group to an *.xml file:

 

Image
RI_2025_enu_012

 

...and save it in your TS folder or share it with colleagues or third parties. (They save the *.xml file in their own TS folder).

Click here for more detailed information on maintaining the Applications and Components catalog.


Administrator's Release Notes

This Release Info from Construsoft highlights various settings and files to ensure that you can quickly start working in Tekla Structures 2024.

In addition to this Release Info, also the Administrator's release notes are available. In these release notes you will find more information about changes that may be interesting for you.

Please check this information as a Tekla Structures user or let your system administrator check it to see what else deserves attention.

Interoperability

IFC export: Position and assembly number

When you export the Tekla Structures model to an IFC file (via File > Export > IFC), you have had the new Coordination view default properties and Design transfer view default properties property sets in the IFC export dialog box since Tekla Structures 2024:

 

Image
RI_2025_enu_019

 

The corresponding (required) properties are included in these property sets.

 

Image
RI_2025_enu_034

 

In Tekla Structures 2024, the default settings were used for this, which meant that the position and assembly numbers were unintentionally not included in the export to IFC.

This has now been fixed so that both the position and assembly numbers are included in the export.

Tekla Structures 2024 Final up to and including Service Pack 6:

 

Image
RI_2025_enu_049

 

Image
RI_2025_enu_050

 

Tekla Structures 2025 (and Tekla Structures 2024 Service Pack 7):

 

Image
RI_2025_enu_051

 

Image
RI_2025_enu_052

New STEP and IGES export tool for tubes/RHS profiles/polyprofiles

Starting from Tekla Structures 2025, you can export polybeams, and straight, curved and arc shaped profiles directly and quickly in the STEP (.stp) or IGES (.igs) format with real arc and bend data for automated manufacturing of steel parts, especially handrails.

To start the export, click the new File > Export > STEP/IGES command:

 

Image
RI_2025_enu_013

 

Image
RI_2025_enu_014

 

Currently, the STEP\IGES export does not export the following objects:

  • Object types related to sheet metal unfolding, such as bent plates and lofted plates.
  • Cambered profiles
  • Warped profiles
  • Reinforcement and mesh
  • Weld preparations created with command Weld.
  • Added materials.
  • Surfaces.
  • Pours.
  • Countersunk holes.
  • Edge chamfers.
  • Tapped and slotted holes.

 

Click here for detailed information in the Tekla Structures 2025 Release Notes.

Click here for detailed information about the exports in STEP and IGES format. 

New STEP export for sheet metal work

Tekla Structures 2025 includes, in addition to Tekla's new STEP/IGES export tool (via File > Export > STEP/IGES), the new STEP Export (ML181) tool for exporting sheet metal work to STEP files:

 

Image
RI_2025_036

 

Image
RI_2025_enu_016

 

The tool can export parts that have been created with various bent plate functionalities in Tekla Structures so that they are suitable for folding machines.

You can download the tool from Tekla Warehouse.

 

In the Tekla Structures model:

 

Image
RI_2025_054

 

STEP file in Trimble Connect: 

 

Image
RI_2025_055

 

A Tekla Structures Diamond license is required to use the tool.

 

The following “sheet metal work functionalities” in Tekla Structures are supported:

  • Command Create cylindrical bent plate.
  • Command Create stand-alone bent plate.
  • Command Polygon cut.
  • Command Line cut.
  • Command Part cut (including polyprofile cuts).
  • Command Bolt (holes).
  • Command Added material.

 

The following functionalities” in Tekla Structures are not supported:

  • Command Polyprofile.
  • Command Create conical bent plate. 
  • Parametric profiles.

 

Also a new bentplate_filter is now available for the new STEP Export (ML181) tool:

 

Image
RI_2025_enu_035

 

As you can see in the properties of the bentplate filter, it uses the new custom property CUSTOM.CS_HAS_CONICAL_BENDS to filter parts that have a conical bend. For more information, see chapter General > New custom properties available.

 

Click here for an instructional video about the new STEP Export (ML181) tool.

Click on the Help button in the STEP Export (ML181) tool for detailed information about how the tool works. 

New STEP Extender tool

Tekla Structures 2025 (and also Tekla Structures 2024 Service Pack 7) includes the new tool STEP Extender (ML180):

 

Image
RI_2025_083

 

Image
RI_2025_enu_015

 

You use the tool to modify the content of STEP files (which were created with the Multi Converter tool) so that the content can be recognized better in various viewers. The PART_POS and ASSEMBLY_POS are written by this tool to specific fields in the STEP file.

Click on the Help button in the tool for detailed information.

Modeling

New layout for displaying objects

In Tekla Structures 2025, the layout of the commands used for displaying parts (1), component parts (2) and reference models (3) has been adjusted in the ribbon.

Tekla Structures 2024:

 

Image
RI_2025_enu_018

 

Tekla Structures 2025:

 

Image
RI_2025_enu_017

 

As you can see, the layout has been simplified and commands have been added to display the hierarchy of buildings (4), to display only the selected part, component and reference model (5), and the command to display the contents of components (6) has been added.

Setting discontinuous weld

The setting discontinuous weld in dialog box Weld has been modified since Tekla Structures Service Pack 7 so that default values are now defined for the discontinuous weld:

 

Image
RI_2025_enu_036

 

Image
kettinglas3

Numbering preview

You can now preview the proposed position numbers before you apply the numbering results to model objects, such as parts, assemblies, and reinforcement objects:

 

Image
RI_2025_enu_037

 

This way you can prevent time-consuming investigations and fixing of numbering errors, such as overlapping position numbers, afterwards:

 

Image
RI_2025_enu_038

 

Additionally, it becomes easier to detect accidental changes in objects that have already been delivered to a factory or construction site before assigning the position numbers.

The new Numbering preview dialog opens when you start a numbering command, Number modified objects or Number series of selected objects from the ribbon, or either of the Diagnose & repair > Numbering commands from the File menu.

In the Numbering preview dialog, you can filter and sort numbering results in various ways, and you can find objects with overlapping numbers that require fixing. You can then accept the proposed numbers or reject them and go back to adjust the numbering settings and the model as needed.

 

Disable preview

If you do not want to preview the proposed numbers, but want to number the model as you did in earlier Tekla Structures versions, you can add the following commands to the ribbon (via File > Settings > Ribbon):

 

Image
RI_2025_enu_065

 

In the ribbon:

 

Image
RI_2025_enu_066

 

If desired, you can also set a shortcut key for these commands (via File > Settings > Keyboard shortcuts):

 

Image
RI_2025_enu_067

 

Click here and here for more information about customizing the ribbon and keyboard shortcuts.

 

Once the numbers have been assigned to the relevant model objects, they are also displayed in Tekla Structures in the properties dialog box of the parts:

 

Image
RI_2025_enu_039

 

Click here for an instruction video about the numbering preview.

Click here for detailed information about the numbering preview in the Tekla Structures 2025 Release Notes.

New numbering functionality: Reinforcement sequence numbering

In Tekla Structures 2025, you can number reinforcement objects using running sequence numbers that start from 1 (or A, or other specified start number or letter) within each cast unit or pour unit. This method complies with the industry standards of many countries and makes the reinforcement numbers smaller, shorter, and easier to use and read.

There is now a new tab, Reinforcement sequence numbering, in the Numbering Setup dialog:
 

Image
RI_2025_enu_054

 

Click here for more information about the new functionality Reinforcement sequence numbering.

As a result of this new functionality, the two new reports PDF-bending-schedule_shape_per_cast_unit_sequence.pdf and PDF-bending-schedule_shapes_sequence.pdf are available in Tekla Structures 2025, in which the sequence numbering is applied:
 

Image
RI_2025_enu_059

 

Image
RI_2025_enu_060

 

Also the new template bending-schedule-rebar-shape_sequence.tpl is now available, containing the sequence numbering:

 

Image
RI_2025_enu_061

 

In addition, the Inquire Object dialog box has been adjusted so that the sequence number is also visible there:

 

Image
RI_2025_enu_062

 

The templates and reports also use the new attribute REBAR_SEQ_POS:

 

Image
RI_2025_enu_063

 

Click here for an instruction video.

System components

Bolt-nut-washer report (74)

Tekla Structures includes component Bolt-nut-washer-report (74) for generating a bolt report, including washers, nuts and studs per standard.

 

Image
RI_2025_enu_004

 

The tool now includes a new option to set whether bolts, washers and/or nuts with the name DUMMY are included in reports:

 

Image
RI_2025_enu_040

 

For example, bolt standard 4014-8.8-BOLT, in which dummies are used to model bolts without nuts:

 

Image
RI_2025_enu_041

Template Editor

New content type SIMILAR_REBAR_ASSEMBLY

Since version 2022, Tekla Structures includes the functionality to create rebar assemblies. These are objects of the reinforcement type that you can combine to create an assembly. You can also add other object types to rebar assemblies, such as parts and items. Rebar assemblies are useful when modeling prefabricated cages, for example.

Click here for detailed information about rebar assemblies.

Tekla Structures 2025 includes the new content type SIMILAR_REBAR_ASSEMBLY in the Template editor:

 

Image
RI_2025_enu_055

 

This new content type makes it possible to create templates and reports, showing you in which of the concrete elements a rebar assembly has been positioned.

Since this option has become available, you now have the new template cage_cast-unit_number.tpl:

 

Image
RI_2025_enu_056

 

In addition, the new template has been added to the layout concrete – cage_A4:

 

Image
RI_2025_enu_057

 

Image
RI_2025_enu_058

Drawings

Defining settings for objects in drawing views: Model template Steeldrawings old style expired

Model template Steeldrawings old style

Since some Tekla Structures versions, you have the ability to define settings for objects in drawing views. This includes how parts are displayed or dimensioned in the different views.

For the roles Precast Concrete Detailer and Timber Detailer, this was already possible in some Tekla Structures versions, and since Tekla Structures 2024, in the role Steel Detailer role, you have the model template Steeldrawings old style, in which settings for objects in drawing views are defined.

In Tekla Structures 2025, the model template Steeldrawings old style is not available anymore, so you will only have the new settings for objects in drawing views.

Click here for the example model Steel drawings old style if you still want to use the old drawing settings.

 

Examples

Click here for two elaborated steel-related examples.

Modify values in dimensions

The Drawing Editor now includes the new dimension line setting change value in the dimension line dialog box:

 

Image
RI_2025_enu_042

 

When you apply this setting to a dimension line, you can now adjust the original value of the dimension line without having to use extra characters such as “mm”.

Tekla Structures 2024 Service Pack 6 and earlier:

 

Image
RI_2025_enu_043

 

Image
maatlijn_zelf_opgeven2

 

Tekla Structures 2025 (and Tekla Structures 2024 Service Pack 7):

Now, when you double-click on a dimension line and load the dimension line setting change value, you can now click on the following button (1) and specify a value without extra characters such as “mm”:

 

Image
RI_2025_enu_044

 

Next, click on the Change button:

 

Image
maatlijn_zelf_opgeven5

New user-defined attributes in GA drawings

Tekla Structures 2025 includes the new Remarks tab in the user-defined attributes in the general arrangement drawing properties:

 

Image
RI_2025_enu_045

 

Image
RI_2025_enu_007

 

You can enable and enter all kinds of remarks so that they become visible in the general arrangement drawing.

With the attribute Show remarks template you can enable or disable the template that can be shown in the general arrangement drawing.

The fields Create remark X allow you to enable or disable displaying the comments.

In the fields Remark 1, Remark 2, Remark 3.1 and Remark 3.2 you can enter the text of the remark. Remark 3 is a remark that combines the two texts in Remark 3.1 and Remark 3.2. This allows you to use more characters in a remark. 

Furthermore, the fields Create textual remark 1 and Create textual remark 2 have been added. In the template, a row is created in which the user can enter a text field in the Template Editor. Using a text field instead of a value field allows more characters to be used.

Note: When you make an adjustment to the template, this adjustment is applied to all drawings in which this template is used. This field is therefore not suitable for placing a different remark on each drawing, but it is suitable for general remarks that are the same in every project.

 

In Tekla Structures 2025, the template remarks.tpl has been added to the layout of the general arrangement drawings, in which these user-defined attributes are displayed.

In the Layout Editor:

 

Image
RI_2025_enu_006

 

The template remarks.tpl in the Template Editor:

 

Image
RI_2025_enu_047

 

Example

 

Image
RI_2025_enu_053

 

Image
RI_2025_enu_046

 

Check personal layout

If you have changed the layout files (*.lay files) in earlier Tekla Structures versions, check these and add the template remarks.tpl if desired.

Tools/plug-ins

Pack & Go (m161)

Tekla Structures includes the tool Pack & Go tool (m161) to save the model data and other necessary files and information in one zip file from a Tekla Structures model, for example, to archive models or to send them to the Construsoft Helpdesk:

 

Image
RI_2025_091

 

Image
RI_2025_enu_003

 

The tool has been improved and now first checks if the files/databases used in the Tekla Structures model are present and, if they are not present in the model, copies them to the *.zip file being created.

Design Group Numbering (ML002)

When you are working in Tekla Structures with a configuration where you cannot (comparatively) number parts (Engineering or Construction Modeling, Graphite or Carbon), for example, to number foundation pile plans or cladding, you can use the tool Design Group Numbering tool (ML002).

 

Image
RI_2025_093

 

Image
RI_2025_enu_064

 

The tool now includes a Help file, and a new Compare Length option has been added so that you can now specify in the Compare Length column whether you want piles with different lengths, for example, to have a different number.

The options are:

  • Yes: The length of the parts are compared. Parts having the same cross section and same length do get the same number. Parts having the same cross section, but different lengths will get a different number.
  • No: The length of the parts will not be considered. Parts having the same cross section, but different lengths will get the same number.
  • LENGTH_GROSS: Same results as using the option Yes but instead LENGTH_GROSS will be used. So the yellow and the magenta handle are considered, cuts and fittings are ignored. This can be used in cladding doing a front view with trapped plates. 

 

In addition, the Compare Finish option now allows you to specify whether the finish should be included in the numbering.

提交