Skip to main content

Unfolding cold rolled profiles

Tekla Structures - Not version-specific colled rolled koud gewalste profielen uitslag
Not version-specific
Tekla Structures
Environment
Netherlands

Using the system component Unfold cold rolled profiles (22), you can create an unfolding of parametric cold rolled profiles (for example Z and C profiles). The component first creates a polybeam version of the original profile. The component only works for profiles with a non-tapered cross-section.

 

Image
unfold

Step-by-step plan

For the system component Unfold cold rolled profiles (22) to work correctly, you must first number the model, and the parametric profile or profiles must be selected if the option Unfold in the system component is set to Selected parts:

  

Image
Geselecteerde.png


Holes or cutouts are included in the polybeam version:

  

Image
2016_12_27_07_59_434.png


Other information (assembly number, part number, quantity) from the original cold-rolled profile can be written to the user-defined attributes of the polybeam. When writing the quantity to a user-defined attribute, the number of selected parts is used; it is not calculated automatically.

  

Image
aantal_onderdelen.png



  

Image
userfields.png


The new polybeam can be placed using an offset relative to the original parametric profile, or at a user-defined insertion point. In both cases, a position must be indicated.

Submit

Table of Contents