PEB Frame (S92) creates a pre-engineered building frame to the selected point. This component uses existing components to create built-up columns and rafters, base plates, knee connection, splice connections, and apex connection.
Objects created
-
Built-up rafter (1 to 4 segments)
-
Apex connection
-
Splice connections
-
Knee connections (2)
-
Built-up columns (1 to 4 segments)
-
Base plate details (2)
Use for
| Situation | Description |
|---|---|
|
|
Frame consisting of spliced columns and spliced rafters. |
|
|
Apex connection between two rafters at the apex of the portal frame. |
|
The first splice between the first and the second segment of the rafter. |
|
|
The second splice between the second and the third segment of the rafter. |
|
|
Knee connection between the second segment of the column and the first segment of the rafter. |
|
|
Column splice between the first and the second segment of the column. |
|
|
Column base plate detail. |
Selection order
-
Pick the point in which to insert the frame.
The frame is created automatically when you pick the point.
Part identification key

| Description | |
|---|---|
|
1 |
Column |
|
2 |
Rafter |
Picture tab
Use the Picture tab to define the frame dimensions.
Dimensions

| Description | |
|---|---|
|
1 |
Column horizontal distance from the input point |
|
2 |
Column height |
|
3 |
Rafter offset distance from the input frame |
|
4 |
Rafter angle |
|
5 |
Frame width |
|
6 |
Orientation of the frame |
Parameters tab
Use the Parameters tab to define part properties. Select whether the components are exploded or not.
Parts
| Option | Description |
|---|---|
|
Column 1, Column 2 |
Select a component from the Applications & components catalog. Define the segments and lengths. |
|
Rafter 1, Rafter 3 |
Select a component from the Applications & components catalog. Define the segments and lengths. |
|
Column 1 base plate, Column 2 base plate |
Select a component from the Applications & components catalog. |
|
Column 1 knee joint, Column 2 knee joint |
Select a component from the Applications & components catalog. |
|
Apex splice joint |
Select a component from the Applications & components catalog. |