Skip to main content

Built up box (S6)

Modified: 12 Jan 2026 Tekla Structures 2026
2026
Tekla Structures

Built up box (S6) creates a built-up section with full or partial cover plates along the flange of channel sections. In addition to cover plates, you can include lacing or batten plates along the length of the column or beam.

Objects created

  • Cover plates

  • Lacing plates (optional)

  • Batten plates (optional)

  • Bolts

  • Welds

Use for

Situation Description

Built up boxes between columns.

Selection order

  1. Select the first main part (column or beam).

  2. Select the second main part (column or beam).

    The connection is created automatically when the second part is selected.

Part identification key

Description

1

Lacing plates

2

Cover plates

3

Batten plates

Picture tab

Use the Picture tab to define the dimensions.

Dimensions

Description Default

1

Vertical distance from the top of the main profile to the topmost batten profile (or lacing profile if batten plates are not created).

10 mm

2

Vertical distance from the bottom of the main profile to the bottom batten profile (or lacing profile if batten plates are not created).

10 mm

3

Number of mid batten or lacing divisions.

3

4

Spacing between batten plates. Not used when cover plates are created.

Parts tab

Use the Parts tab to define the part properties.

Option Description

Top batten/Middle batten/Bottom batten/Cover plate/Lacing

Thickness, width, and height of the part.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Class

Part class number.

Finish

Describes how the part surface has been treated.

Parameters tab

Use the Parameters tab to define the pattern of lacing, type of built-up section, lacing and batten placement, lacing placement distances, and type of lacing end.

Pattern of lacing

Option Description

Select the pattern of lacing plates.

Type of built-up section

Define what kind of built-up section is used.

Option Description

Full/partial cover plate

Only batten plates

Only lacing plates

Both batten plates and lacing plates (default)

Lacing/batten placement

Define how the lacing and batten plates are placed.

Option Description

Placement according to the longer leg.

Placement according to the shorter leg.
Option Description

Outer leg at top.

Outer leg at bottom.

Lacing placement distances

Description Default

1

Distance between outer edge of main profile and placement line of batten plate.

Web thickness of the main profile

2

Clearance gap (weld) between lacing and batten plates. If battens are not created, clearance between lacing.

10 mm

3

Distance between the outer edge of the main profile and the placement line of lacing.

Web thickness of the main profile

Type of lacing end

Define how the lacing profile is fitted.

Option Description

Lacing profile is fitted perpendicular to the main profile.

Lacing profile is fitted perpendicular to the batten profile.

Lacing profile is fitted perpendicular to both the main profile and the batten plate.

Web plates tab

Use the Web plates tab tab to define the web plate properties.

Web plate creation

Define if inner and outer web plates are created.

Option Description

Outer web plate/Inner web plate

Thickness of the plate.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Web plate creation

Define how the web plate is created.

Option Description

Web plate is not created (default).

Web plate is created inside the main profile.

Web plate is created outside the main profile.

Web plate is created on both sides of the main profile.

Web plate clearances

Description Default

1

Clearance of outer web plate from top of main profile.

Flange thickness + radius

2

Clearance of inner web plate from top of main profile.

Flange thickness + radius

3

Clearance of outer web plate from bottom of main profile.

Flange thickness + radius

4

Clearance of inner web plate from bottom of main profile.

Flange thickness + radius

If there is no rounding radius for the main profile, the default web plate clearance is 1.5 times the plate thickness for parametric U and C profiles, and 0.7 times the web thickness for I profiles.

Web plate vertical offsets

Description

1

Vertical offset from the top of the column to the top of the web plate.

2

Vertical offset from the bottom of the column to the bottom of the web plate.

Bottom batten bolts / Mid batten bolts / Top batten bolts tab

Use the Bolts tabs to define the bolt group dimensions and bolt properties.

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Plate attachment

Option Description Default

Attachment

Specifies whether the plate is bolted or welded to the main profile.

Bolted

Bolt group dimensions

Description Default

1

Vertical distance from the upper/lower edge to the nearest bolts.

1.5 bolt diameter

2

Number of bolts.

4

3

Spacing of bolts.

2.5 bolt diameter

4

Horizontal distance from the edge to the nearest bolts.

1.5 bolt diameter

5

Number of bolt rows to create.

1

6

Spacings between the bolt rows.

2.5 bolt diameter

Lacing bolts tab

Use the Lacing bolts tab to define the bolt group dimensions and bolt properties for lacing. The options on this tab correspond to the lacing end type options on the Parameters tab.

Description Default

1

Distance from the bolt position.

0

2

Edge distance along the center line.

1.5 bolt diameter

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Plate attachment

Option Description Default

Attachment

Specifies whether the plate is bolted or welded to the main profile.

Bolted

Bolt edge distances

The available options for bolt edge distances in the following two tables are active based on the type of lacing placement defined on the Parameters tab.

Option Description

Bolt edge distance is perpendicular to the edge of the lacing.

Bolt edge distance is orthogonal to the edge of the lacing.

Option Description

Bolt edge distance is perpendicular to the edge of the lacing.

Bolt edge distance is orthogonal to the edge of the lacing.

Submit

Table of Contents