Skip to main content

Kingspan Multichannel Base Cleat (4)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

The Kingspan Multichannel Base Cleat is provided as a detail for the bottom of Multichannel columns. It will define either an autoformed end for the column, single/double cold rolled cleats, or single/double hot rolled cleats. 

Before and after

Image
tekla-structures-ks-4-before.png
 
Image
tekla-structures-ks-4-after.png

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • Holes, not bolts will be defined in the cleats.
  • The Multichannel should be perpendicular to the ground / floor slab
  • The Multichannel will be cut back appropriately based on the pick position

Selection order example

  1. Multichannel
  2. Pick a position along the Multichannel where the autoform/cleat should be created
Image
tekla-structures-ks-4-selection-order.png

See also

Kingspan cold rolled - Important information
Kingspan Multichannel Base Cleat (4) - Parameters tab
Submit