Kingspan Multichannel Base Cleat (4)
Not version-specific
Tekla Structures
Environment
Not environment-specific
The Kingspan Multichannel Base Cleat is provided as a detail for the bottom of Multichannel columns. It will define either an autoformed end for the column, single/double cold rolled cleats, or single/double hot rolled cleats.
Before and after
Image
Image
Notes
- Any modification of the selected parts will cause this joint to be updated.
- Holes, not bolts will be defined in the cleats.
- The Multichannel should be perpendicular to the ground / floor slab
- The Multichannel will be cut back appropriately based on the pick position
Selection order example
- Multichannel
- Pick a position along the Multichannel where the autoform/cleat should be created
Image
See also
Kingspan cold rolled - Important informationKingspan Multichannel Base Cleat (4) - Parameters tab