Skip to main content

Roof window (64)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Construsoft European

Image
001

 

With the plug-in Roof window (64) it is possible to generate the frame or a invalid region for the purpose of a penetration in a roof element. In the background, the component uses the functionality from component Cladding window (51) to create the actual invalid regions and split the required parts. The functionality from component Roof window (64) takes care of generating the different parts needed.

Back to top

Objects created

  • Roof windows
  • Invalid regions
Back to top

Used for

SituationDescription
Image
64_012
Roof window
Image
64_011
Invalid region
Back to top

Before you start

Create a roof construction.

Back to top

Selection order

The component is placed by defining a plane through 3 points in which the frame is generated.

  1. Local origin
  2. Direction of the local X-axis and the dimension of the frame / invalid region in this direction (depending on the chosen setting).
  3. Direction of the local y-axis and the dimension of the frame / recess in this direction (depending on the chosen setting).

Picture tab

On the "Picture" tab, the frame layout is defined by entering the dimensions and selecting the profiles. The color of the picture determines the status of the component:

  • Gray = inactive
  • Orange = active (active parts are generated in the model) Also, the resulting openings can be filled with panels of different designs. 
Image
003

 

OptionDescription 
1Selection list of options how to determine the geometry of the wooden roof frame or invalid region. The red colored points / dimension lines will be used. The gray colored objects are not active and thus will not be used with the corresponding option. Whichever option is chosen, 3 points will first have to be selected in the model for the placement and definition of the plane.
2Horizontal offset relative to the left side of the roof window frame or invalid region.
3Vertical offset relative to the top.
4Vertical offset relative to the bottom.
5Horizontal offset relative to the right side of the roof window frame or invalid region.
6Position of the generated objects relative to the selected insertion point.
Image
64_006

 

Insertion point is top of tile batten.
Image
64_007

Insertion point is bottom of tile batten/ top of counter batten. 

 

Image
64_008

Insertion point is bottom of counter batten / top of rafter. 

 

Image
64_009

Insertion point is bottom of rafter/top of plate. 

 

Image
64_010
Insertion point is bottom of plate.
7Additional offset relative to the inserted point.
8Generate a window frame in mirrored configuration. The mirroring is done around the imaginary vertical line in the center of the frame.
9Define the starting number and assembly prefix for the generated parts. The created parts form composition. No weld over connection is made to the corresponding roof element.
10Dimensions in the cross-section; including sheet crossings and spacing of the beams.
11

Through the various pull-down menus, choose whether and which profiles will be created. The various properties of the profiles are defined on the Parts tab.

Also, various intermediate and crossing distances can be defined.

Batten tab

On the "Batten" tab, define the counter batten and tile battens around the roof window. 

Image
004

 

OptionDescription
1Select the profile that will be on the top of the roof window. The profile can be set on the Parts tab.
2Select the profile that will be on the side of the roof window (counter batten). The profile can be set on the Parts tab.
3If Fill Opening is set to Yes, you can enter a clearance between the sheet and the roof window.
aDefine the distance that the tile batten (2) should be set back from the counter batten around the roof window. If 0, the tile batten is flush with the counter batten.
bOverhang of the battens on the side of the roof window relative to the top and bottom.
cHorizontal distance of batten (1) from batten (2).
dDistance between counter batten and tile batten at the top of the roof window.
Tile battenSelect the profile for the tile battens. The profile can be set on the Parts tab.
Fill opening

Indicate whether the roof window opening should be filled with any sheet. 

Options:

  • Yes
  • No
ThicknessThickness of sheet.
PrefixPrefix of the sheet.
Start noStart number of the sheet.
MaterialMaterial of the sheet.
NameName of the sheet.
ZoneZone of the sheet. To be found in the user-defined attributes (UDA).
CommentComment of the sheet. To be found in the user-defined attributes (UDA).
FinishFinishing of the sheet.

Offsets tab

On the "Offsets" tab, the offsets of the window or invalid region in relation to the counter and tile battens are set. 

Image
005

 

OptionDescription
1Distance from the rafters to the outside of the sheet around roof opening at the top.
2

Distance from batten on rafters to outside of sheet around roof opening.

3Distance between sheets of roof to outside of sheet around roof opening on left side.
4Distance between sheets of roof to outside of sheet around roof opening on right side.
5Distance from the rafters to the outside of the sheet around roof opening at the bottom.
6Distance from batten on rafters to outside of sheet around roof opening at bottom.

Parts tab

On the "Parts" tab, set the profiles used to create the roof window. 

Image
006

 

OptionDescription
ProfileSelect a profile from the profile database.
PrefixPart prefix.
Start noPart start number.
ClassClass of the part.
MaterialMaterial of the part. To be selected from the materials database.
NamePart name.
Rotation

Part rotation. 

Options:

  • Front
  • Top
  • Back
  • Below
ZoneSpecify in which zone the profiles should be.
FinishFinishing the part.
PlatePlate on he inside off the opening.

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
007

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA. 

Back to top
Submit