Roof window (64)
With the plug-in Roof window (64) it is possible to generate the frame or a invalid region for the purpose of a penetration in a roof element. In the background, the component uses the functionality from component Cladding window (51) to create the actual invalid regions and split the required parts. The functionality from component Roof window (64) takes care of generating the different parts needed.
Back to topObjects created
- Roof windows
- Invalid regions
Used for
| Situation | Description |
|---|---|
|
Image
| Roof window |
|
Image
| Invalid region |
Before you start
Create a roof construction.
Back to topSelection order
The component is placed by defining a plane through 3 points in which the frame is generated.
- Local origin
- Direction of the local X-axis and the dimension of the frame / invalid region in this direction (depending on the chosen setting).
- Direction of the local y-axis and the dimension of the frame / recess in this direction (depending on the chosen setting).
Picture tab
On the "Picture" tab, the frame layout is defined by entering the dimensions and selecting the profiles. The color of the picture determines the status of the component:
- Gray = inactive
- Orange = active (active parts are generated in the model) Also, the resulting openings can be filled with panels of different designs.
| Option | Description | |
|---|---|---|
| 1 | Selection list of options how to determine the geometry of the wooden roof frame or invalid region. The red colored points / dimension lines will be used. The gray colored objects are not active and thus will not be used with the corresponding option. Whichever option is chosen, 3 points will first have to be selected in the model for the placement and definition of the plane. | |
| 2 | Horizontal offset relative to the left side of the roof window frame or invalid region. | |
| 3 | Vertical offset relative to the top. | |
| 4 | Vertical offset relative to the bottom. | |
| 5 | Horizontal offset relative to the right side of the roof window frame or invalid region. | |
| 6 | Position of the generated objects relative to the selected insertion point. | |
|
Image
| Insertion point is top of tile batten. | |
|
Image
| Insertion point is bottom of tile batten/ top of counter batten.
| |
|
Image
| Insertion point is bottom of counter batten / top of rafter.
| |
|
Image
| Insertion point is bottom of rafter/top of plate.
| |
|
Image
| Insertion point is bottom of plate. | |
| 7 | Additional offset relative to the inserted point. | |
| 8 | Generate a window frame in mirrored configuration. The mirroring is done around the imaginary vertical line in the center of the frame. | |
| 9 | Define the starting number and assembly prefix for the generated parts. The created parts form composition. No weld over connection is made to the corresponding roof element. | |
| 10 | Dimensions in the cross-section; including sheet crossings and spacing of the beams. | |
| 11 | Through the various pull-down menus, choose whether and which profiles will be created. The various properties of the profiles are defined on the Parts tab. Also, various intermediate and crossing distances can be defined. | |
Batten tab
On the "Batten" tab, define the counter batten and tile battens around the roof window.
| Option | Description |
|---|---|
| 1 | Select the profile that will be on the top of the roof window. The profile can be set on the Parts tab. |
| 2 | Select the profile that will be on the side of the roof window (counter batten). The profile can be set on the Parts tab. |
| 3 | If Fill Opening is set to Yes, you can enter a clearance between the sheet and the roof window. |
| a | Define the distance that the tile batten (2) should be set back from the counter batten around the roof window. If 0, the tile batten is flush with the counter batten. |
| b | Overhang of the battens on the side of the roof window relative to the top and bottom. |
| c | Horizontal distance of batten (1) from batten (2). |
| d | Distance between counter batten and tile batten at the top of the roof window. |
| Tile batten | Select the profile for the tile battens. The profile can be set on the Parts tab. |
| Fill opening | Indicate whether the roof window opening should be filled with any sheet. Options:
|
| Thickness | Thickness of sheet. |
| Prefix | Prefix of the sheet. |
| Start no | Start number of the sheet. |
| Material | Material of the sheet. |
| Name | Name of the sheet. |
| Zone | Zone of the sheet. To be found in the user-defined attributes (UDA). |
| Comment | Comment of the sheet. To be found in the user-defined attributes (UDA). |
| Finish | Finishing of the sheet. |
Offsets tab
On the "Offsets" tab, the offsets of the window or invalid region in relation to the counter and tile battens are set.
| Option | Description |
|---|---|
| 1 | Distance from the rafters to the outside of the sheet around roof opening at the top. |
| 2 | Distance from batten on rafters to outside of sheet around roof opening. |
| 3 | Distance between sheets of roof to outside of sheet around roof opening on left side. |
| 4 | Distance between sheets of roof to outside of sheet around roof opening on right side. |
| 5 | Distance from the rafters to the outside of the sheet around roof opening at the bottom. |
| 6 | Distance from batten on rafters to outside of sheet around roof opening at bottom. |
Parts tab
On the "Parts" tab, set the profiles used to create the roof window.
| Option | Description |
|---|---|
| Profile | Select a profile from the profile database. |
| Prefix | Part prefix. |
| Start no | Part start number. |
| Class | Class of the part. |
| Material | Material of the part. To be selected from the materials database. |
| Name | Part name. |
| Rotation | Part rotation. Options:
|
| Zone | Specify in which zone the profiles should be. |
| Finish | Finishing the part. |
| Plate | Plate on he inside off the opening. |
About tab
Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.