Direkt zum Inhalt

Slab Reinforcement Bottom

Tekla Structures - Not version-specific Slab reinforcement edge reinforcement slab additional reinforcement slab top additional reinforcement top additional reinforcement
Not version-specific
Tekla Structures
Environment
Not environment-specific

The 'Slab Reinforcement Bottom' plugin allows you to create reinfocement in slab based on beams surrounded.

How to locate

Installers are available at 'Slab Reinforcement Bottom'.

After installation, the 'Slab Reinforcement Bottom' plugin is available in the 'Applications & components'.
  
Image
image.png

Usage

Pick a slab,
Pick main reference beam,
Pick remaining beams at other edges of slab and this selection is optional.

Slab Reinforcement Bottom dialog box

The dialog box contains the following tabs:

    Main Bars
    Cross Bars
    Properties

Main Bars

   

Image
image.png


Rebar length option:

TypeDescription
CoefficientRebar cover from beam center / slab edge is calculated based on factor of beam to beam / slab edge distance as shown dimension L1 in image.
DistanceExact distance from beam center.
   
Image
image.png


Change direction of Rebar:

This is yes / no control to control the direction of rebars and by default it created the rebar perpendicular to reference beam selected. If opted 'yes' then it rebar placed parallel to reference beam.


Range offset and spacing:

Range offset from beam face / slab edge are controlled as shown below. Bar spacing is target spacing and the spacing is maintained to this value or less than this value.

  
Image
image.png

Cover Setout:

TypeDescription
 
Image
image.png
Cover from bottom of slab
 
Image
image.png
Cover from top of slab

Cross Bars:

  
Image
image.png

Cross bar creation:

This is yes / no control to control creation of additional rebar along beam.

Setout:

The cross bars are controlled as like main bars with coefficient / distance. Also range can be defined from beam face / slab edge.

TypeDescription
 
Image
image.png
Places the cross bar below main bar
 
Image
image.png
Places the cross bar over main bar

Properties:

All rebar properties are available in this tab.

 
Image
image.png

Hook option:

 
Image
image.png

90 degree hook can be configured and to change the direction hook, enter negative value in leg length.
Absenden