Fit beams and columns
Plugin Fit Beams And Columns can be used to fit and\or cut parts (steel, concrete or timber profiles) and connect them. The fitting\cut can be placed in several ways also like mitre. Also, a gap between the profiles can be defined and profiles can be connected with e.g. a weld.
Back to topObjects created
- Fitting and\or line cut
Use for
| Situation | Description |
|---|---|
|
Image
|
Mitre |
|
Image
|
Fit both profiles |
|
Image
|
One of the two profiles is not cut and continues |
Before you start
Create two profiles
Back to topSelection order
- Select the main part
- Select the secondary part
The connection is created automatically.
Back to topSettings tab
In this tab, you can define the desired type of connection and the gap.
| Description | |
|---|---|
| 1 | Define the size of the gap. In case the field is empty, no gap will be created (0 mm gap). |
| 2 and 3 |
Two listboxes in order to define the fit type. In the listbox (field 2) the method of fitting can be defined:
Image
|
| 4 | In complex double skew situations: fitting in web direction or fitting in flange direction. |
| 5 |
The maximum value for gap opening. For this, you must set the Listbox in field 3 to: Image
The following options are available:
Image
Image
Image
Image
|
|
6 |
Define part #1: fitting or line cut. |
| 7 | Define part #2: fitting or line cut. |
| 8 |
Define how to connect the parts. The available options are:
|
Welding tab
To enable this tab, you have to set the option Connect parts on tab Settings to By welding.
Use this tab to define the weld size, weld type and if needed a weld preparation
| Option | Description |
|---|---|
| Edge/Around |
Indicates whether only one edge or the entire perimeter of a face should be welded.
Image
|
| Workshop/Site |
Indicates where the weld should be made. This setting affects assemblies and drawings.
Image
Image
|
| Position | Defines the position of the weld. Options are: +x,-x,+y,-y,+z,-z. |
| Shape |
Defines the shape of the weld. The options are:
Image
Image
Image
|
| Connect as | Define whether the parts are welded or added as a sub-assembly |
| Placement |
Defines how the weld is placed in relation to the assembly parts. The options are:
|
| Preparation |
Defines which assembly parts, if any, are automatically prepared for welding. The options are:
|
| Reference text | Additional information to appear in the weld mark. For example, information about the weld specification or process |
| Prefix | Defines weld prefix for above and below line |
| Type | See the list of weld types below. |
| Size |
The size of the weld. If you enter a zero or negative weld size, Tekla Structures creates the weld, but does not display it in drawings. For compound weld types Image
and Image
, you can enter two size values |
| Angle |
The angle of weld preparation, bevels, or groove. Enter a positive value for bevel and groove welds. Tekla Structures displays the angle between the weld type symbol and the fill type contour symbol. |
| Contour |
The fill type contour of a weld can be:
Image
Image
Image
This setting does not affect solid weld objects. |
| Finish |
Tekla Structures displays the finish symbol above the weld type symbol in drawings. The options are:
Image
Image
This settings does not affect solid weld objects. |
| Root face |
Root face thickness is the height of the narrowest part inside the root opening. Root face values do not appear in drawings, but you can use the WELD_ROOT_FACE_THICKNESS template attribute in reports to show the root face dimension in the weld list. |
| Effective throat | The weld size used in weld strength calculation. |
| Root open |
The space between the welded parts. Enter a positive value for square-groove welds. |
| # of incr | Defines the amount of increments in the weld. |
| Length |
Defines the length value that is shown in the weld mark. For intermittent welds, defines the length of an increment. Does not affect continuous solid weld objects |
| Pitch |
If the advanced option XS_AISC_WELD_MARK is set to TRUE, the centre-to-centre spacing of weld increments in an intermittent weld. If the advanced option XS_AISC_WELD_MARK is set to FALSE, the space between the weld increments in an intermittent weld. Tekla Structures uses the – character by default to separate weld length and pitch, for example 50–100. To change the separator to @, for example, set the advanced option XS_WELD_LENGTH_CC_SEPARATOR_CHAR to @ |