Hyppää pääsisältöön

Fit beams and columns

Tekla Structures - Not version-specific fit beams and column
Not version-specific
Tekla Structures
Environment
Not environment-specific

Plugin Fit Beams And Columns can be used to fit and\or cut parts (steel, concrete or timber profiles) and connect them. The fitting\cut can be placed in several ways also like mitre. Also, a gap between the profiles can be defined and profiles can be connected with e.g. a weld.

Back to top

Objects created

  • Fitting and\or line cut
Back to top

Use for

Situation Description
Image
FitBeamsAndColumns1
Mitre
Image
FitBeamsAndColumns2
Fit both profiles
Image
FitBeamsAndColumns3
One of the two profiles is not cut and continues
Back to top

Before you start

Create two profiles

Back to top

Selection order

  1. Select the main part
  2. Select the secondary part

The connection is created automatically.

Back to top

Settings tab

In this tab, you can define the desired type of connection and the gap.

Image
FitBeamsAndColumns_Dialog
  Description
1 Define the size of the gap. In case the field is empty, no gap will be created (0 mm gap).
2 and 3

Two listboxes in order to define the fit type.

In the listbox (field 2) the method of fitting can be defined:

  • Mitre
  • Part #2 fit to part #1, both parts are fitted.
  • Part #1 fit to part #2, both parts are fitted.
  • Part #2 fit to part #1, do not fit part #1.
  • Part #1 fit to part #2, do not fit part #2.
  • Part #2 fit with overlap on part #1, both parts are fitted.
  • Part #2 fit with overlap on part #1, do not fit part 1.
  • Part #1 fit with overlap on part #2, do not fit part 2.
Image
FitBeamsAndColumns_Fitting
4 In complex double skew situations: fitting in web direction or fitting in flange direction.
5

The maximum value for gap opening. For this, you must set the Listbox in field 3 to:

Image
FitBeamsAndColumns6

The following options are available:

  • Use default. The secondary part will be fitted with a right angle.
Image
FitBeamsAndColumns7
  • Define gap threshold. If the distance (in the picture 150.0) is less than the entered value (200.0), the secondary part is right angle fitted. If the distance is greater than the entered value, the secondary part will be fitted to the main part.
Image
FitBeamsAndColumns9
Image
FitBeamsAndColumns10
  • Define gap. The entered value is used as the distance to fit the secondary part
Image
FitBeamsAndColumns8

6

Define part #1: fitting or line cut.
7 Define part #2: fitting or line cut.
8

Define how to connect the parts.

The available options are:

  • No                      No connection between parts
  • Cast unit          The second selected part will be added (cast unit) to the main part.
  • Sub-assembly The second selected part will be added as a sub-assembly.
  • By welding       The second selected part will be welded to the main part.
Back to top

Welding tab

To enable this tab, you have to set the option Connect parts on tab Settings to By welding.

Use this tab to define the weld size, weld type and if needed a weld preparation

Image
FitBeamsAndColumns_Welding

 

Option Description
Edge/Around

Indicates whether only one edge or the entire perimeter of a face should be welded.

  • Edge: 
Image
WeldingEdge1
  • Around:
    Image
    WeldingEdge2
Workshop/Site

Indicates where the weld should be made. This setting affects assemblies and drawings.

  • Workshop:
Image
WeldingShop2
  • Site:
Image
WeldingShop1
Position Defines the position of the weld. Options are: +x,-x,+y,-y,+z,-z.
Shape

Defines the shape of the weld. The options are:

  • Continuous
Image
WeldingShape1
  • Chain Intermittent
Image
WeldingShape2
  • Staggered Intermittent
Image
WeldingShape3
Connect as Define whether the parts are welded or added as a sub-assembly
Placement

Defines how the weld is placed in relation to the assembly parts. The options are:

  • Auto - The weld placement adapts to the typical situation of the weld type. Square-, V-, and U-groove welds are located in the middle of the main and secondary parts. Single-bevel and J-groove welds are located on the secondary part side. This is the default option.
  • Main part - The weld is located fully on the main part side. Does not affect V- or U-groove welds.
  • Secondary part - The weld is located fully on the secondary part side. Does not affect V- or U-groove welds.
Preparation

Defines which assembly parts, if any, are automatically prepared for welding. The options are:

  • None - Parts are not prepared for welding. This is the default option.
  • Auto - Parts are prepared for welding according to the weld type.
  • Main part - The main part is prepared for welding.
  • Secondary part - The secondary part is prepared for welding.
Reference text Additional information to appear in the weld mark. For example, information about the weld specification or process
Prefix Defines weld prefix for above and below line
Type See the list of weld types below.
Size

The size of the weld.

If you enter a zero or negative weld size, Tekla Structures creates the weld, but does not display it in drawings.

For compound weld types

Image
WeldingType1

 

 

and 

Image
WeldingType2

 

 

, you can enter two size values

Angle

The angle of weld preparation, bevels, or groove.

Enter a positive value for bevel and groove welds.

Tekla Structures displays the angle between the weld type symbol and the fill type contour symbol.

Contour

The fill type contour of a weld can be:

  • None
  • Flush
Image
WeldingContour1
  • Convex
Image
WeldingContour2
  • Concave
Image
WeldingContour3

This setting does not affect solid weld objects.

Finish

Tekla Structures displays the finish symbol above the weld type symbol in drawings. The options are:

  • G (Grind)
  • M (Machine)
  • C (Chip)
  • (Flush finished weld)
Image
WeldFinish1
  • (Smooth blended weld face)
Image
WeldFinish2

This settings does not affect solid weld objects.

Root face

Root face thickness is the height of the narrowest part inside the root opening.

Root face values do not appear in drawings, but you can use the WELD_ROOT_FACE_THICKNESS template attribute in reports to show the root face dimension in the weld list.

Effective throat The weld size used in weld strength calculation.
Root open

The space between the welded parts.

Enter a positive value for square-groove welds.

# of incr Defines the amount of increments in the weld.
Length

Defines the length value that is shown in the weld mark.

For intermittent welds, defines the length of an increment.

Does not affect continuous solid weld objects

Pitch

If the advanced option XS_AISC_WELD_MARK is set to TRUE, the centre-to-centre spacing of weld increments in an intermittent weld.

If the advanced option XS_AISC_WELD_MARK is set to FALSE, the space between the weld increments in an intermittent weld.

Tekla Structures uses the – character by default to separate weld length and pitch, for example 50–100. To change the separator to @, for example, set the advanced option XS_WELD_LENGTH_CC_SEPARATOR_CHAR to @

Back to top
Lähetä