Skip to main content

Specify the loading for load-dependent drawings

Modified: 5 May 2021 Tekla Structural Designer 2025
2025
Tekla Structural Designer

To specify the loading for load-dependent drawings, do the following:

  1. On the Draw tab, click Drawing Management...

    The Drawing Management dialog box opens.

  2. In the Available Styles list, select the desired drawing category.
  3. In the Available Drawings list, select the desired drawing.
  4. Click Loading...

    The Select loading dialog box opens.

  5. Select the desired loadcases and combinations.
  6. Click OK.
Submit

Table of Contents