Connects 1 to 10 braces to a beam or column by bolting them to a gusset plate, and welding or bolting the gusset plate to the beam or column. The braces can be:
-
Located in the same work plane as the beam or column, or skewed
-
On the same side of the beam or column, or on each side
Profiles
Braces: L
Parts created
-
One gusset plate, if the braces are located on the same side of the beam or column
OR
-
One gusset plate on each side of the beam or column, if the braces are located on either side of the beam or column. The plates are welded in the shop to create a folded gusset plate.
Use for
| Situation | Description |
|---|---|
|
|
Two gusset plates (welded in the shop to form a folded plate) Brace profile: L Connection method: Braces bolted directly to gusset plate |
|
|
Column or beam profile: L Brace profile: L Connection method:
|
Before you start
Create a beam or column and 1 to 10 braces.
Defining properties
Use the following tabs in the dialog box to define the properties of the parts this component creates:
| Tab | Contents | See also |
|---|---|---|
|
Picture |
Dimensions that define gusset plate shape; brace clearances and cut options for ends of braces. |
|
|
Gusset |
Gusset plate properties, brace notch properties, weld options. |
Defining gusset plate position on the brace Creating tongue plates (20, 22, 56) |
|
Gusset conn |
Bolt group properties of the bolts connecting the gusset plate to the beam or column. |
|
|
General |
Connection properties, AutoDefaults and AutoConnection rule groups. |
|
|
Bracebolts1 |
Bolt group properties for the bolts that connect the braces to the upper, or only gusset plate. |
|
|
Bracebolts2 |
Bolt group properties for the bolts that connect the braces to the lower gusset plate. |
|
|
Brace conn |
Option to create filler plates between the braces and the gusset plate; option to bolt the braces to the beam or column, as well as the gusset plate. |
|
|
Analysis |
Information used in structural analysis. |
Selection order
-
Beam or column
-
First brace
-
Second and subsequent braces
-
Click the middle mouse button to create the component