You can align
objects (texts, marks, notes and views) above, below, to the left, to the horizontal center,
to the vertical center and to the right of the point you pick. You can also position objects
horizontally or vertically at equal distances from each other.
In an open drawing, do any of the
following:
| To |
Do this |
|
Align selected
views, texts, marks, and notes
|
-
Select the objects that you want to align.
You can
select one or several objects using appropriate
selection switches or filters and area selection, for
example. If you want to align marks and notes only, you
can use Drawing content manager for first selecting the building objects and then the
related marks or notes.
For more
information about Drawing content manager, see Drawing content manager.
- Select the aligning
command from the toolbar:
Click to align
objects above the point you pick. Click to align
objects below the point you pick. Click to align
objects to the right of the point you pick. Click to align
objects to the left of the point you pick. Click to align
objects to the vertical center of the point you pick. Click to align
objects to the horizontal center of the point you pick.
Click
to position
objects to the vertical center of the point you pick at
equal distances. Click to position
objects to the horizontal center of the point you pick at
equal distances.
- Pick a location for
the alignment.
If you have
mixed objects selected, such as views and text objects, you
will be asked to select which objects you want to align.
- If you selected one
of the two commands that position objects at equal
distances, type the distance in the displayed dialog box and
press Enter.
Tip:
To create a row of objects, align them first to the top and then position them horizontally at equal distances from each other. You do not need to reselect the objects between the two commands.
|
|
Align selected
marks and notes automatically
|
- Click
on the
Annotations tab.
This aligns the
selected marks and notes by stacking the marks or notes and
placing them evenly.

This command
applies to all marks and associative notes, except weld marks.
|
|
Align selected
marks and notes around a point
|
This command tries
to avoid crossing leader lines when placing the marks.

This command
applies to all marks and associative notes, except weld marks.
|