Skip to main content

Add marks, notes, and texts in drawings

Modified: 4 Oct 2023 Tekla Structures 2023
2023
Tekla Structures

You can add many kinds of annotation objects in your drawings, such as marks, notes, and texts. Some of these are associative and some independent.

Associative annotation objects

Associative annotation objects are updated according to the changes you make in a building object in the model. Dimensions, marks, and notes are associative.

In addition to the automatic marks and dimensions that you already may have in a drawing, you can add new ones and modify their properties:

Drawing content manager

Add part marks manually in drawings

Add reinforcement marks manually in drawings

Add reinforcement marks with Rebar group marking application

Adjust mark visibility in an existing drawing

Add reinforcement ticks or reinforcement tags in drawings

Show welds in drawings

Add marks to spiral beams

Add level marks in drawings

Add associative notes in drawings

Add dimensions manually to general arrangement drawings

Modify marks or notes in drawings

Drag leader line associativity point

Update part and weld marks in drawings

Delete marks for selected parts

Check changed marks, notes and dimensions and remove change symbols

Merge marks

Add dimensions manually

Independent annotation objects

Independent annotation objects are not linked or connected to the Tekla Structures model in any way. For example, texts, DWG/DXF files, symbols, section marks, detail marks, revision marks, various types of sketch objects, links and hyperlinks are all independent annotation objects.

Independent annotation objects will become associative if you snap to a building object when you create them, because then the objects will get associativity points. For example, in texts, the content does not change when the model changes but the associativity point may change. Another example is a line: if you snap to a part edge when you create a line in a drawing, the line will get an associativity point and move with the part in the drawing if the part changes in the model.

You can add and modify texts, shapes, section marks, detail marks, DWG/DXF files, links, hyperlinks, revision marks, sketch objects, and symbols in an open drawing only.

Add and modify section marks in drawings

Add and modify detail marks in drawings

Add and modify text in drawings

Add revision marks in drawings

Add and modify symbols in drawings

Add links in drawings

Add sketch objects in drawings

Submit

Table of Contents