Railing double curve (95) connects the rail profiles of consecutive railings to each other. The rails have to reside so that the intersection is found.
Objects created
-
Railing profile
-
Welds
Use for
| Situation | Description |
|---|---|
|
|
Rail profiles of consecutive railings connected |
Selection order
-
Select the main part.
-
Select the secondary part.
The connection is created automatically when you select the secondary part.
Part identification key

| Description | |
|---|---|
|
1 |
Railing profile |
Picture tab
Use the Picture tab to control the geometry of the connection.
Dimensions

| Description | Default | |
|---|---|---|
|
1 |
Angle of the connecting beam. |
90 degrees |
|
2 |
The length of the straight part between the bend and the first beam or second beam, measured from the geometrical intersection of the beams. |
290 mm |
|
3 |
Bend radius of the curved parts. |
140 degrees |
|
4 |
Connecting beam position. The position is measured from the main part to the middle of the beam. |
Beam is placed in the middle of the parts. |
Parts tab
Use the Parts tab to define the part properties.
Parts
| Option | Description |
|---|---|
|
Profile |
Select the profile from the profile catalog. By default, the profile is the profile of the main part. |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
Parameters tab
Use the Parameters tab to define the method of construction for the connection.
Construction method
| Option | Description |
|---|---|
|
Create |
A new railing part is created to connect the main and secondary parts. This is the default option. |
|
Extend |
The railing is created as three tubes welded together. |
Fabricator name
Enter the fabricator name of the bend and the calculated additional beams.
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more:
