Select one of the following options to set the orientation when you print a tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print a tab in the Earthwork module. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Takeoff tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Takeoff tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Area tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Trench tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Trench tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Len/EA tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Count tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the 3D tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the 3D tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select this checkbox to include a legend when you print the 3D tab.

Select this checkbox to include the degrees of spin, tilt, and magnification with the printed 3D view.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Section tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Section tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select this checkbox to include a legend when you print the Section tab.

Select this checkbox to include a plan view representation of your site along with the printout of the cross section you selected. You can set the percent of the page to use for the plan view in the Percent field.

If you select the Print Plan View checkbox, enter the percent of the page to use when printing the plan view or click to increase or decrease the percent. You can enter a percent between 0 and 80 percent.

If you select the Print Plan View checkbox, select this checkbox to include location points for northing and easting in your printed report.

Select this checkbox to include the cut and fill amounts required at the station you selected when you print the Section tab.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Grid tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Grid tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select this checkbox to include a legend when you print the Grid tab.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Select this checkbox to include the area name, intersection point, x-grid, and y-grid settings, and the average haul distance when you print the Grid tab.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Summary tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Summary tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select this checkbox to include the job totals when you print the Summary tab.

Select one of the following options for the amount of area-related information included when you print the Summary tab:

• All - Prints all areas.

• Selected - Prints only the areas you have selected.

• None - Includes no area-specific information on your printed report.

  Note: If areas are grouped, the application only prints subtotals for area types with more than one area.

Select this checkbox to print grid lines separating the rows and columns when you print the Summary tab.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.

Select one of the following options to set the orientation when you print the Layout tab:

• Portrait

• Landscape

Select this checkbox to include the contents of the Header and Footer fields (discussed below) on every printed page.

Select this checkbox to display the Report Options popup window each time you print the Layout tab. Deselect the checkbox to use the default settings and not display the Report Options popup window.

Select one of the following options to specify how to print drawings:

• Print Job on 1 Page - Fits the entire job on a single sheet of paper.

• Print Zoomed Region on 1 Page - Allows you to zoom in on a particular area of your site and print only that area on a single sheet of paper.

• Print Job to Scale - Allows you to print your job at the scale you set for the job (the job scale is listed under Current Scale within the Report Options popup window). Depending on the scale of the job, this could take several sheets of paper.

Select one of the following options to use as the format when you print Layout tab:

• Plan view

• Spreadsheet

• Both

Select this checkbox to print grid lines separating the rows and columns when you print the Layout tab.

Each unlabeled field represents a location on the header. For example, information entered in the top left field appears on the top left of the header. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the header:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Each unlabeled field represents a location on the footer. For example, information entered in the top left field appears on the top left of the footer. Enter information in the fields as needed.

You can use any of the following codes to display variable information in the footer:

• <REPORTNAME> - Prints the report name.

• <DATE> - Prints the date.

• <TIME> - Prints the time.

• <LAYER> - Prints the name of the layer, either Existing or Proposed.

Select the Center checkbox to center the information in the corresponding field when it is printed. Deselect the checkbox to left-align the information when it is printed.