Kiosk Mode allows users to clock in and clock out easily one after another by simply entering their employee number and password on a Kiosk Login page.

The option to clock in from Field Tools > Kiosk Clock-In Mode allows users to enter their managed Trimble ID username on the Kiosk Login, provided the criteria listed below is met.

Kiosk Mode Type	Location	Managed Trimble ID logins supported?
Kiosk Login		No
Kiosk clock-in from the login screen		No
Kiosk clock in from Field Tools > Kiosk Clock-In Mode		Yes, but only if the password is not required. For users to be able to clock in here with a managed username: The portal setting Require Employee Password when Clocking In / Out from Field Tools > Kiosk Clock-in Mode must be disabled. An admin must unlock the Kiosk so users can clock in / out.

Portal settings referenced in this article are found in Admin > Portal Settings > Timecard > Time Clock unless otherwise stated. You must be a Timecard Admin to configure this feature.

1. Before you can configure Kiosk mode you must have configured Configure Time Worked.
2. To get to Kiosk mode you only need to add /Account/KioskLogin to the end of your portal URL. From this page, users will be able to clock in and out by entering their employee number and password.
3. If you have multiple companies and want users to log in without having to select a company, you can use a Direct Company Login URL for Kiosk Mode:
   1. If you have not already done so, Create a Direct Company Login.
   2. In a browser tab, navigate to your Direct Company Login URL (shown on the Portal Settings page), and replace the "/Login" portion of the URL with "/KioskLogin." See the following example:

      This Direct Company Login URL	Becomes this in Kiosk Mode
      https://vistawebportal.com/Account/Login?co=ABC123	https://vistawebportal.com/Account/KioskLogin?co=ABC123

4. If you would like to set up a Kiosk mode where users only need to enter their employee number, enter a password into portal setting Kiosk Mode: Password to unlock the clock in page. To get to this Kiosk, you will need to go to Field Tools > Project Documentation > Kiosk Clock-In Mode and enter the password you assigned to the portal setting.
5. If you like the password-protected Kiosk mode but you still want users to enter their password when clocking in or out, enable Require Employee Password when Clocking In / Out from Field Tools > Kiosk Clock-in Mode. If you disable Require Employee Password when Clocking In / Out from Field Tools > Kiosk Clock-in Mode, employees clocking in or out will see the name attached to the employee number they entered so they can verify that their number was entered correctly. You can also disable the non-password-protected Kiosk mode (step 2) by enabling portal setting Disable Non password Kiosk Mode.
   Note: Currently, users cannot clock in via SSO from the Login page.
6. For additional settings for clock in / out, see Clock In / Clock Out Configuration (you do not need to enable clock in from navigation or login page if you plan to only use Kiosk Mode).