Built up box (S6) creates a built-up section with full or partial cover plates along the flange of channel sections. In addition to cover plates, you can include lacing or batten plates along the length of the column or beam.
Objects created
-
Cover plates
-
Lacing plates (optional)
-
Batten plates (optional)
-
Bolts
-
Welds
Use for
| Situation | Description |
|---|---|
|
|
Built up boxes between columns. |
Selection order
-
Select the first main part (column or beam).
-
Select the second main part (column or beam).
The connection is created automatically when the second part is selected.
Part identification key

| Description | |
|---|---|
|
1 |
Lacing plates |
|
2 |
Cover plates |
|
3 |
Batten plates |
Picture tab
Use the Picture tab to define the dimensions.
Dimensions

| Description | Default | |
|---|---|---|
|
1 |
Vertical distance from the top of the main profile to the topmost batten profile (or lacing profile if batten plates are not created). |
10 mm |
|
2 |
Vertical distance from the bottom of the main profile to the bottom batten profile (or lacing profile if batten plates are not created). |
10 mm |
|
3 |
Number of mid batten or lacing divisions. |
3 |
|
4 |
Spacing between batten plates. Not used when cover plates are created. |
Parts tab
Use the Parts tab to define the part properties.
| Option | Description |
|---|---|
|
Top batten/Middle batten/Bottom batten/Cover plate/Lacing |
Thickness, width, and height of the part. |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
|
|
Class |
Part class number. |
|
|
Finish |
Describes how the part surface has been treated. |
Parameters tab
Use the Parameters tab to define the pattern of lacing, type of built-up section, lacing and batten placement, lacing placement distances, and type of lacing end.
Pattern of lacing
| Option | Description |
|---|---|
|
|
Select the pattern of lacing plates. |
Type of built-up section
Define what kind of built-up section is used.
| Option | Description |
|---|---|
|
|
Full/partial cover plate |
|
|
Only batten plates |
|
|
Only lacing plates |
|
|
Both batten plates and lacing plates (default) |
Lacing/batten placement
Define how the lacing and batten plates are placed.
| Option | Description |
|---|---|
|
|
Placement according to the longer leg. |
|
|
Placement according to the shorter leg. |
| Option | Description |
|---|---|
|
|
Outer leg at top. |
|
|
Outer leg at bottom. |
Lacing placement distances

| Description | Default | |
|---|---|---|
|
1 |
Distance between outer edge of main profile and placement line of batten plate. |
Web thickness of the main profile |
|
2 |
Clearance gap (weld) between lacing and batten plates. If battens are not created, clearance between lacing. |
10 mm |
|
3 |
Distance between the outer edge of the main profile and the placement line of lacing. |
Web thickness of the main profile |
Type of lacing end
Define how the lacing profile is fitted.
| Option | Description |
|---|---|
|
|
Lacing profile is fitted perpendicular to the main profile. |
|
|
Lacing profile is fitted perpendicular to the batten profile. |
|
|
Lacing profile is fitted perpendicular to both the main profile and the batten plate. |
Web plates tab
Use the Web plates tab tab to define the web plate properties.
Web plate creation
Define if inner and outer web plates are created.
| Option | Description |
|---|---|
|
Outer web plate/Inner web plate |
Thickness of the plate. |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
Web plate creation
Define how the web plate is created.
| Option | Description |
|---|---|
|
|
Web plate is not created (default). |
|
|
Web plate is created inside the main profile. |
|
|
Web plate is created outside the main profile. |
|
|
Web plate is created on both sides of the main profile. |
Web plate clearances

| Description | Default | |
|---|---|---|
|
1 |
Clearance of outer web plate from top of main profile. |
Flange thickness + radius |
|
2 |
Clearance of inner web plate from top of main profile. |
Flange thickness + radius |
|
3 |
Clearance of outer web plate from bottom of main profile. |
Flange thickness + radius |
|
4 |
Clearance of inner web plate from bottom of main profile. |
Flange thickness + radius |
If there is no rounding radius for the main profile, the default web plate clearance is 1.5 times the plate thickness for parametric U and C profiles, and 0.7 times the web thickness for I profiles.
Web plate vertical offsets

| Description | |
|---|---|
|
1 |
Vertical offset from the top of the column to the top of the web plate. |
|
2 |
Vertical offset from the bottom of the column to the bottom of the web plate. |
Bottom batten bolts / Mid batten bolts / Top batten bolts tab
Use the Bolts tabs to define the bolt group dimensions and bolt properties.
Bolt basic properties
|
Option |
Description |
Default |
|---|---|---|
|
Bolt size |
Bolt diameter. |
Available sizes are defined in the bolt assembly catalog. |
|
Bolt standard |
Bolt standard to be used inside the component. |
Available standards are defined in the bolt assembly catalog. |
|
Tolerance |
Gap between the bolt and the hole. |
|
|
Thread in mat |
Defines whether the thread may be within the bolted parts when bolts are used with a shaft. This has no effect when full-threaded bolts are used. |
Yes |
|
Site/Workshop |
Location where the bolts should be attached. |
Site |
Plate attachment
| Option | Description | Default |
|---|---|---|
|
Attachment |
Specifies whether the plate is bolted or welded to the main profile. |
Bolted |
Bolt group dimensions

| Description | Default | |
|---|---|---|
|
1 |
Vertical distance from the upper/lower edge to the nearest bolts. |
1.5 bolt diameter |
|
2 |
Number of bolts. |
4 |
|
3 |
Spacing of bolts. |
2.5 bolt diameter |
|
4 |
Horizontal distance from the edge to the nearest bolts. |
1.5 bolt diameter |
|
5 |
Number of bolt rows to create. |
1 |
|
6 |
Spacings between the bolt rows. |
2.5 bolt diameter |
Lacing bolts tab
Use the Lacing bolts tab to define the bolt group dimensions and bolt properties for lacing. The options on this tab correspond to the lacing end type options on the Parameters tab.

| Description | Default | |
|---|---|---|
|
1 |
Distance from the bolt position. |
0 |
|
2 |
Edge distance along the center line. |
1.5 bolt diameter |
Bolt basic properties
|
Option |
Description |
Default |
|---|---|---|
|
Bolt size |
Bolt diameter. |
Available sizes are defined in the bolt assembly catalog. |
|
Bolt standard |
Bolt standard to be used inside the component. |
Available standards are defined in the bolt assembly catalog. |
|
Tolerance |
Gap between the bolt and the hole. |
|
|
Thread in mat |
Defines whether the thread may be within the bolted parts when bolts are used with a shaft. This has no effect when full-threaded bolts are used. |
Yes |
|
Site/Workshop |
Location where the bolts should be attached. |
Site |
Plate attachment
| Option | Description | Default |
|---|---|---|
|
Attachment |
Specifies whether the plate is bolted or welded to the main profile. |
Bolted |
Bolt edge distances
The available options for bolt edge distances in the following two tables are active based on the type of lacing placement defined on the Parameters tab.
| Option | Description |
|---|---|
|
|
Bolt edge distance is perpendicular to the edge of the lacing. |
|
|
Bolt edge distance is orthogonal to the edge of the lacing. |
| Option | Description |
|---|---|
|
|
Bolt edge distance is perpendicular to the edge of the lacing. |
|
|
Bolt edge distance is orthogonal to the edge of the lacing. |
Welds
Click the link below to find out more:






















