Display values from level marks from assemblies in marks
In Tekla Structures you can display values from level marks from assemblies in marks, such as an anchorbolt plan:
For this purpose, you have the following value fields available:
| Assembly level bottom side | ASSEMBLY_BOTTOM_LEVEL |
| ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED | |
| Assembly level top side | ASSEMBLY_TOP_LEVEL |
| ASSEMBLY.ASSEMBLY_TOP_LEVEL_UNFORMATTED |
The positions of the yellow and purple points in the column are irrelevant; what matters is the assembly.
When value field ASSEMBLY_BOTTOM_LEVEL is used in the mark, the level mark -30 is added to the mark:
The appearance of the ASSEMBLY_BOTTOM_LEVEL value field in the mark is defined in the MarkDimensionFormat setting in the Straight dimension dialog box (tab Dimensioning > Horizontal):
If desired, you can modify this setting and save it with the name MarkDimensionFormat (and perhaps copy it to the TS folder so you can use the setting in all models):
When the value field ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED is used in the mark, level mark -30 is added to the mark again:
You can configure the appearance of the ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED value field in the following fields: