주요 콘텐츠로 건너뛰기

Display values from level marks from assemblies in marks

Tekla Structures - Not version-specific ankerplan Label ASSEMBLY_TOP_LEVEL_UNFORMATTED ASSEMBLY_TOP_LEVEL ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED ASSEMBLY_BOTTOM_LEVEL
Not version-specific
Tekla Structures
Environment
Construsoft European

In Tekla Structures you can display values from level marks from assemblies in marks, such as an anchorbolt plan:

 

Image
enu-2026-peilmaten-001

 

For this purpose, you have the following value fields available:
 

Assembly level bottom sideASSEMBLY_BOTTOM_LEVEL
 ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED
Assembly level top sideASSEMBLY_TOP_LEVEL
 ASSEMBLY.ASSEMBLY_TOP_LEVEL_UNFORMATTED


The positions of the yellow and purple points in the column are irrelevant; what matters is the assembly.

When value field ASSEMBLY_BOTTOM_LEVEL is used in the mark, the level mark -30 is added to the mark:

 

Image
enu-2026-peilmaten-002

 

The appearance of the ASSEMBLY_BOTTOM_LEVEL value field in the mark is defined in the MarkDimensionFormat setting in the Straight dimension dialog box (tab Dimensioning > Horizontal):

 

Image
enu-2026-peilmaten-003

 

If desired, you can modify this setting and save it with the name MarkDimensionFormat (and perhaps copy it to the TS folder so you can use the setting in all models):

 

Image
enu-2026-peilmaten-004

 

When the value field ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED is used in the mark, level mark -30 is added to the mark again:

 

Image
enu-2026-peilmaten-005

 

You can configure the appearance of the ASSEMBLY.ASSEMBLY_BOTTOM_LEVEL_UNFORMATTED value field in the following fields:

 

Image
enu-2026-peilmaten-006
전송

Table of Contents