Overslaan en naar de inhoud gaan

Tekla Structures 2025 US environment Release Notes

Tekla Structures 2025 User-defined attributes user defined attributes drawing template Numbering prefix missing profiles ribbon
2025
Tekla Structures
Environment
United States (Imperial)
United States (Metric)
Materials
Concrete
Steel

Below you will find the release notes specific to the US environment for Tekla Structures 2025.


Project User-defined attribute tabs updated & aligned between disciplines

Project level User-defined attributes have been standardized. This standardization effort merges previously discipline-specific tabs customizations into all roles. The main goal is to streamline the user experience and ensure consistency across tabs and different roles.

Notable updates to Project Team and Subcontractor Team tabs:

  • Fax attributes removed.
  • Desc/Website attributes replaced with with Website attributes.
  • Contact, Email & Project # (where previously non-existent) attributes added.

Project Team tab Attribute name changes

OldNew
Display nameAttribute nameDisplay nameAttribute name
General Contractor: Project NumberPROJECT_NUMBERGENERAL CONTRACTOR: Project #GC​​​_​​​​PRJ​​​_​​​​NUMBER
OwnerPROJECT_OWNEROWNER: NameOWNER
         Desc/WebsiteOWNER_DESCR         WebsiteOWNER_URL
ArchitectPROJECT_ARCHITECTARCHITECT: NameARCH
         Main ContactDESIGN_CONTACT         ContactARCH_CONTACT
         AddressDESIGN_ADDRESS         Address Line 1ARCH_ADDRESS
         City/StateDESIGN_ADDRESS         City/State/ZipARCH_CITY_ST
         Desc/WebsiteDESIGN_DESCR         WebsiteARCH_URL
Engineer TeamENG_INFOENGINEER: NameENG
         Main ContactENG_CONTACT         ContactENG_CONTACT
         Desc/WebsiteENG_DESCR         WebsiteENG_URL

Subcontractor Team tab Attribute name changes

OldNew
Display nameAttribute nameDisplay nameAttribute name
Concrete SubcontractorSUB_CONTRACTOR1CONCRETE SUBCONTRACTOR: NameCONC_SUB
         Main ContactSUB_CONTACT1         ContactCONC_SUB_CONTACT
         AddressSUB_ADDRESS1         Address Line 1CONC_SUB_ADDRESS
         City/StateSUB_CITY_ST1         City/State/ZipCONC_SUB_CITY_ST
         PhoneSUB_PHONE1         PhoneCONC_SUB_PHONE
         Desc/WebsiteSUB_DESCR1         Website CONC_SUB_URL
Electrical SubcontractorSUB_CONTRACTOR2ELECTRICAL SUBCONTRACTOR: NameELEC_SUB
         Main ContactSUB_CONTACT2         ContactELEC_SUB_CONTACT
         AddressSUB_ADDRESS2         Address Line 1ELEC_SUB_ADDRESS
         City/StateSUB_CITY_ST2         City/State/ZipELEC_SUB_CITY_ST
         PhoneSUB_PHONE2         PhoneELEC_SUB_PHONE
         Desc/WebsiteSUB_DESCR2         WebsiteELEC_SUB_URL
Mechanical SubcontractorSUB_CONTRACTOR3MECHANICAL SUBCONTRACTOR: NameMECH_SUB
         Main ContactSUB_CONTACT3         ContactMECH_SUB_CONTACT
         AddressSUB_ADDRESS3         Address Line 1MECH_SUB_ADDRESS
         City/StateSUB_CITY_ST3         City/State/ZipMECH_SUB_CITY_ST
         PhoneSUB_PHONE3         PhoneMECH_SUB_PHONE
         Desc/WebsiteSUB_DESCR3         Website MECH_SUB_URL
Plumbing SubcontractorSUB_CONTRACTOR4PLUMBING SUBCONTRACTOR: NamePLUMB_SUB
         Main ContactSUB_CONTACT4         ContactPLUMB_SUB_CONTACT
         AddressSUB_ADDRESS4         Address Line 1PLUMB_SUB_ADDRESS
         City/StateSUB_CITY_ST4         City/State/ZipPLUMB_SUB_CITY_ST
         PhoneSUB_PHONE4         PhonePLUMB_SUB_PHONE
         Desc/WebsiteSUB_DESCR4         Website PLUMB_SUB_URL

Fabrication Team (was Fabricator Information) tab Attribute name changes

OldNew
Display nameAttribute nameDisplay nameAttribute name
Fabricator Desc/WebsiteFAB_DESCRFABRICATOR: WebsiteFAB_URL
Detailer NameDET_NAMEDETAILER: NameDET
         Detailer Desc/WebsiteDET_DESCR         WebsiteDET_URL

Potential Template Updates for Backwards Compatibility

For the updated Attribute names, it is possible to retain backwards compatibility to the old Attribute names using a Conditional structure (if/then statement) that checks if the old attribute name has a value

IsSet("<OldAttributeName>") && GetValue("<OldAttributeName>") != ""

and if it does then output the value

GetValue("<OldAttributeName>")

otherwise/else

GetValue("<NewAttributeName>")

 

Below is an example Conditional structure that could be used for backwards compatibility for the update from PROJECT_OWNER to OWNER:

if (IsSet("PROJECT.USERDEFINED.PROJECT_OWNER") && GetValue("PROJECT.USERDEFINED.PROJECT_OWNER") != "")
 then GetValue("PROJECT.USERDEFINED.PROJECT_OWNER")
else
 GetValue("PROJECT.USERDEFINED.OWNER")
endif

New Steel Standards Project User-defined attribute tab

The Steel Detailing Role Project standards Project UDA tab has been replaced with a new Steel Standards with additional fields. 

Image
Screenshot showing the old Project standards UDA tab and the new Steel Standards UDA tab.

Steel Standards (previously Project standards) tab Attribute name changes

OldNew
Display nameAttribute nameDisplay nameAttribute name
Project Std. PaintPROJECT_STD_PAINTCoatingPRJ_COAT
PRJ_CUST_COAT
PRJ_CUST_COAT2
PRJ_COAT_COLOR
Project Std. FinishPROJECT_FINISHAESS CategoryPRJ_STD_AESS
Misc. Joint FinishPRJ_STD_MISC
Surface Prep.PRJ_STD_PREP
Project Std. Paint Mil ThicknessPROJECT_MIL_THICKCoat ThicknessPRJ_COAT_THK
Project Std. Bolt GradePROJECT_STD_BOLTSHOP STANDARDS: BoltsPRJ_STD_S_diameter
PRJ_STD_S_screwdin
FIELD STANDARDS: BoltsPRJ_STD_F_diameter
PRJ_STD_F_screwdin
Project Std. Hole DiameterPROJECT_STD_HOLE_DIHole DiameterPRJ_S_HOLE_DIA
Project Std. Material SpecPROJECT_STD_MATLMaterialPRJ_STD_MATL
Project Std. Field Connx.PROJECT_STD_CONNXConnectionPRJ_STD_CONNX
Project Std. WeldsPROJECT_STD_WELDSHOP STANDARDS: WeldsPRJ_STD_S_WELD
FIELD STANDARDS: WeldsPRJ_STD_F_WELD
Project Std. ElectrodesPROJECT_ELECTRODESHOP STANDARDS: Weld ElectrodesPRJ_S_ELECT
FIELD STANDARDS: Weld ElectrodesPRJ_STD_F_ELECT
Project Std. Cope RadiusPROJECT_STD_COPECope RadiusPRJ_STD_COPE

SHOP STANDARDS

AESS Category — PROJECT.USERDEFINED.PRJ_STD_AESS

Dropdown menu with vales per ANSI/AISC 303-22: Code of Standard Practice for Steel Buildings and Bridges Section 10.1.1 and Table 10.1 AESS Category Matrix.

Misc. Joint Finish — PROJECT.USERDEFINED.PRJ_STD_MISC

Dropdown menu with vales per National Ornamental and Miscellaneous Metals Association Joint Finish Guidelines. 

Material — PROJECT.USERDEFINED.PRJ_STD_MATL

String (alphanumeric text) input field.

Bolts — PROJECT.USERDEFINED.PRJ_STD_S_diameter & PROJECT.USERDEFINED.PRJ_STD_S_screwdin

Two dropdown menus for Bolt size and Bolt standard; these values are populated from the Bolt catalog.

Hole Diameter — PROJECT.USERDEFINED.PRJ_S_HOLE_DIA

Dimension input field. When inputting values, if the XS_INCH_SIGN_ALWAYS is set to FALSE, inch marks will not show.

Cope Radius — PROJECT.USERDEFINED.PRJ_STD_COPE

Dimension input field. When inputting values, if the XS_INCH_SIGN_ALWAYS is set to FALSE, inch marks will not show.

Welds — PROJECT.USERDEFINED.PRJ_STD_S_WELD

String (alphanumeric text) input field.

Weld Electrodes — PROJECT.USERDEFINED.PRJ_S_ELECT

String (alphanumeric text) input field.

FIELD STANDARDS

Connection — PROJECT.USERDEFINED.PRJ_STD_CONNX

String (alphanumeric text) input field.

Bolts — PROJECT.USERDEFINED.PRJ_STD_F_diameter & PROJECT.USERDEFINED.PRJ_STD_F_screwdin

Two dropdown menus for Bolt size and Bolt standard; these values are populated from the Bolt catalog.

Welds — PROJECT.USERDEFINED.PRJ_STD_F_WELD

String (alphanumeric text) input field.

Weld Electrodes — PROJECT.USERDEFINED.PRJ_STD_F_ELECT

String (alphanumeric text) input field.

FINISH/COATING

Surface Prep. — PROJECT.USERDEFINED.PRJ_STD_AESS

Dropdown menu with vales per ANSI/AISC 325 Steel Construction Manual, 16th Ed. Table 2-7 Summary of Surface Preparation Standards. STD STRUCT is the default value.

Coating — PROJECT.USERDEFINED.PRJ_STD_AESS

There are five options in the dropdown menu: CUSTOM, GALVANIZED, NONE, POWDER COAT, & STD SHOP PRIMER (default).

         Custom 1 — PROJECT.USERDEFINED.PRJ_CUST_COAT

         String (alphanumeric text) input field. Activate only when Coating: CUSTOM is selected.

         Custom 2 — PROJECT.USERDEFINED.PRJ_CUST_COAT2

         String (alphanumeric text) input field. Activate only when Coating: CUSTOM is selected.

Color — PROJECT.USERDEFINED.PRJ_COAT_COLOR

 String (alphanumeric text) input field. Not active only when Coating: NONE is selected.

Coat Thickness — PROJECT.USERDEFINED.PRJ_COAT_THK

String (alphanumeric text) input field. Not active only when Coating: NONE is selected.

Drawing Templates Updated for Steel Standards attribute names

The drawing templates value fields for the corresponding legacy—removed—Project standards tab have been updated to per the new Steel Standards tab attribute names.

TSLOC-7739, TSLOC-8992

Additional line types in drawings

Line types from ..\Environments\common\inp\TeklaStructures.lin have been merged with the US environment's ..\Environments\USA\Common\General\UserDefined\TeklaStructures.lin. The new ones end in 2 and are ½ scale.

Image
Screenshot showing the additional line types.

Folder structure updates to align with the common environment

..\USA\Common\General\profil directory has been added and ImportExport has been renamed to Collaboration (colaboracion in Latinoamerica) to maintain consistency with main installation common environment.

TSLOC-8986, TSLOC-8823

User-defined attribute files split by object type and tab to align with the common environment

Extending the Reorganization of the common\inp folder, the US environment inp files have been separated into more manageable and understandable files. The naming convention is objects_<TYPE>_<ORIGIN ENVIRONMENT>_<TAB>.inp.

Image
Screenshots showing how the userdefined.inp files were spilt.

TSLOC-7729

End Prep User-defined attributes have been improved

End Preps for this Member in BOM User-defined attribute dropdown list has been updated to clarify what will be shown. The BOM templates have also been updated for the change.

Image
Screenshot showing the updated End Prep UDAs

To update templates from older versions, the formula line for end prep overrides needs to be changed from

if GetValue("USERDEFINED.END_PREP") == "Yes" then

to

if GetValue("USERDEFINED.END_PREP_LIST") != "Auto" then

TSLOC-8830

Optimized the use of screen space in ribbons

Optimized the use of screen space by consolidating whitespace in the ribbons. This enhancement aims to provide a more compact and efficient user interface, allowing users to maximize their workspace and improve overall productivity.

Image
Screenshots showing the old and new ribbons with the new having less whitespace.

TSLOC-8820

Document manager and Reports added to Quick Access Toolbar

Added the Document Manager and Reports split buttons to the Quick Access Toolbar to enhance user productivity and streamline access to these frequently used commands. We believe these improvements will significantly benefit users by making essential tools more accessible and easier to use.

Image
Screenshot showing the addition of the Document Manager and Reports split buttons to the Quick Access Toolbar.

For more information, see Customize the ribbon and Distribute customized ribbons by using a firm or environment folder.

TSLOC-8824

Ribbons are more aligned between Roles

Ribbons for the Steel and Concrete roles have been standardized. This standardization effort merges various discipline-specific customizations into each role based on industry expertise. The main goal is to streamline the user experience and ensure consistency across different roles.

TSLOC-8819

Changes to parametric profile names in profitab.inp

To better align the US environment with Core updates and include additional profiles, profitab.inp has been merged with the core. The following profile definitions were removed from US Environment and replaced by the ones from Tekla Global common.

OldNew
AS_PNL_TPNL_C
AS_PNL_TAPNL_D
AS_PNL_TBPNL_E
AS_PNL_TGPNL_F
BORDERPNL_A
RCSSPRMD
RECTCPNL_A
RECTCCPNL_G
RESSPRMD
RSTRPNL_A
S_PNLPNL_G
S_PNL_TPNL_H

The following parametric profile alias definitions were removed from the US Environment because they potentially cause erroneous errors to display and/or have standard dimensions that do not very. 

No parametric profiles or their fixed profiles were removed. If additional fixed profiles are desired, it is recommended to Create a fixed profile by copying an existing profile with the industry standard dimensions.

GLB_PSL_S4S_
LSL_RB_TJI_
LVL_RS_ 

TSLOC-8872, TSLOC-8838

For more information on parametric profiles and the profitab.inp, see Files related to catalogs, the Add profile definitions to the profitab.inp file, Properties used in profitab.inp sections of the Create parametric profiles using .clb files product guide, and Create a fixed profile by copying an existing profile section of the Create fixed profiles product guide..

Masonry materials added to Material Catalog for Tekla Structural Designer linking

Tekla Structural Designer 2025 enhances the design of masonry walls. In order to integrate these items with Tekla Structures, the following materials have been added.

Role UnitAdditional Materials
Imperial8 in CMU wall - 2500 psi (3250 psi/S)
10 in CMU wall - 2500 psi (3250 psi/S)
12 in CMU wall - 2500 psi (3250 psi/S)
Metric200 mm CMU wall - 17.2 MPa (22.4 MPA/S)
250 mm CMU wall - 17.2 MPa (22.4 MPA/S)
305 mm CMU wall - 17.2 MPa (22.4 MPA/S)

TSLOC-8985


Fix list

Defect NumberDevelopment AreaDescription
TSLOC-7044User-defined attributesFastrak (Building Designer) was replaced by Tekla Structural Designer in 2016. The tab was retained for legacy versions, it is now removed.
TSLOC-8943Advanced optionsRemoved Zero-width space characters from .ini files: Some .ini files had Zero-width space character (ZWSP) non-printing characters present. These have been removed from the .ini files.
TSLOC-8827User-defined attributesPreviously Concrete parts had two sets of Concrete covers for rebar sets. The duplicating ConcreteCover tab was removed.
TSLOC-8832User-defined attributesTo facilitate translations to other languages, the "Yes" and "No" UDAs have been updated with translatable values.
Indienen