Passar para o conteúdo principal

Tekla PowerFab Silent Installation Guide

Tekla PowerFab - Not version-specific silent silent install installation Tekla PowerFab Command Lines
Not version-specific
Tekla PowerFab Tekla PowerFab GO

Install Tekla PowerFab automatically without any on-screen prompts using the Command Prompt.

 

Step 1: Open Command Prompt in the Correct Folder

First, you need to open the Command Prompt in the same folder where you saved the installer file (e.g., your Downloads folder). Here are two easy ways to do that:

Method A: From the File Explorer Address Bar (Easiest)

  1. Open File Explorer and go to the folder containing the TeklaPowerFab[version].exe file.
  2. Click in the address bar at the top.
  3. Type cmd and press Enter.

Method B: Using the 'cd' Command

  1. Open the Command Prompt from your Start Menu.
  2. Type cd followed by a space, then the path to your folder.
  3. Press Enter.

For example, if your installer is in Downloads, the command would be:

cd C:\Users\YourUserName\Downloads

Tip: You can right-click the installer file while holding Shift and select "Copy as path". Paste this into the Command Prompt and delete the filename from the end to get the folder path easily.

Step 2: Run the Installation Command

Once the Command Prompt is open in the correct folder, you can run the commands below. In all examples, replace TeklaPowerFab[version].exe with the actual installer filename.

To Update an Existing Installation

The installer will automatically detect the existing installation. To update silently:

TeklaPowerFab[version].exe /S

  • /S tells the installer to run silently.
Server Installation Warning: Only perform a Server Installation on a new machine that does not have an existing Tekla PowerFab server. Running this on an existing server could lead to data loss.

To Perform a New Installation

Client Installation (Default)

  • In the default folder:
    TeklaPowerFab[version].exe /S
  • In a custom folder:
    TeklaPowerFab[version].exe /S /D=C:\CustomFolder

Server Installation

  • In the default folder:
    TeklaPowerFab[version].exe /S /INSTTYPE=Server
  • In a custom folder:
    TeklaPowerFab[version].exe /S /INSTTYPE=Server /D=E:\ServerFiles

Important: The /D=[Directory] command must always be the last part of the command.

Enviar

Table of Contents