Skip to main content

Cross plate profile (S33)

Tekla Structures 2021
2021
Tekla Structures

Cross plate profile (S33) creates a built-up beam using seven plates welded together.

Objects created

  • Plates (7)

Use for

Situation Description

Straight built-up beam, seven plates welded together.

Do not use for

Tapered built-up beams.

Before you start

Ensure that you have two points to pick.

Selection order

  1. Pick the start point for the beam.

  2. Pick the end point for the beam.

    The beam is created automatically when you pick the end point.

Part identification key

Description

1

Cross plate. Seven plates are created.

Picture tab

Use the Picture tab define the dimensions.

Dimensions

Description

1

Width of the beam

2

Height of the beam

3

Height of the plate

4

Adjust the location of the horizontal parts relative to the vertical parts.

By default, the eccentricity is zero. Plates are connected to the middle of the vertical plate.

5

Plate edge dimension to the vertical plate center line.

Parts tab

Use the Parts tab to define the plate properties.

Parts

Option Description

Top flange

Thickness of the top flange.

Bottom flange

Thickness of the bottom flange.

Vertical web

Thickness of the vertical web.

Left flange

Thickness of the left flange.

Right flange

Thickness of the right flange.

Left web

Thickness of the left web.

Right web

Thickness of the right web.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Parameters tab

Use the Parameters tab to define the part name, class and finish, and the position, rotation, and length.

Option

Description

Name

Define the name, class, and finish of the plates.

Class

Finish

Negative values shorten the beam, positive values lengthen it.

  1. Moves the beam end that you pick first.

  2. Moves the beam end that you pick second.

Select the position in plane and define the position in plane offset.

See Part horizontal position.

Select a suitable rotation and define the rotation offset.

See Part rotation.

Select the position in depth and define the position in depth offset.

See Part position depth.

Submit

Table of Contents