Tapered beam (S98) creates a tapered or straight built-up beam with I shape.
Parts created
-
Web plate
-
Top flange plate
-
Bottom flange plate
Use for
|
Situation |
More information |
|---|---|
|
|
Creates a simple built-up beam between two picked points. |
Before you start
Ensure that you have two points to pick.
Selection order
-
Pick a start and end point to indicate beam length:
Picture tab
Use the Picture tab to define the height of the web or the entire beam, sloping rise and run values.
Height of the web or the entire beam, depending on the option in the Height type field on the Parameters tab.
Parts tab
Use the Parts tab to define the properties of the plates.
|
Option |
Description |
Default |
|---|---|---|
|
t, b, h |
Define the thickness, width, and height of the part. |
|
|
Pos_No |
Define a prefix and a starting number for the part position number. Enter the assembly position number on the second row. |
The default part start number is defined in the Components settings in . |
|
Material |
Define the material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Define a name that is shown in drawings and reports. |
Parameters tab
Use the Parameters tab to define the height type, type of reference point, type of cut, end plate thickness, and the position of the web plate.
|
Property |
Description |
|---|---|
|
Height type |
Affects the height values entered in the Picture tab. |
|
Type of reference point |
Location of the end of the beam, relative to a point you pick: Top profile, end of endpl
Top profile, end of webpl
Top webpl, end of endp
Top webpl, end of webpl
|
|
Type of cut |
Shape of beam ends:
|
|
Position of web plate |
Adjusts the location of web plate. See also Part position depth. |
|
Thickness of endplate |
Set-back distance of beam ends.
|
Welds
Click the link below to find out more: