Tapered beam 2 (S45) creates a built-up beam with I shape. The beam can be tapered or straight. You can control the size of the spliced material.
Parts created
-
Web plates
-
Top flange plates
-
Bottom flange plates
Use for
|
Situation |
More information |
|---|---|
|
|
A simple, straight beam built up from two flange plates and a web plate. |
|
|
A tapered beam built-up from several spliced plates. The points you pick determine beam length. You can adjust the length on the Picture tab. |
Before you start
Ensure that you have two points to pick.
Picking order
-
Pick a start and end point to indicate beam length:
Picture tab
Use the Picture tab to define the beam dimensions and location, relative to the points picked.
|
Field |
Description |
More information |
|---|---|---|
|
1 |
Distance from the first point picked to the end of the beam. Negative value lengthen the beam, positive values shorten it. |
|
|
2 |
Beam depth at the first end. |
The height of the web or the entire beam, depending on the option Depth measure.
|
|
3 |
Length of top flange plates. |
For example, to have four one-meter sections, enter 4*1000. Leave blank to create the flange or web from a single plate. |
|
4 |
Length of web plates. |
|
|
5 |
Length of bottom flange. |
|
|
6 |
Gap between the top flange plates. |
|
|
7 |
How much the beam slopes from the horizontal. |
Enter a percentage. |
|
8 |
Gap between the bottom flange plates. |
|
|
9 |
Distance from the last point picked to the end of the beam. Negative value lengthen the beam, positive values shorten it. |
|
|
10 |
Beam depth at the second end. |
The height of the web or the entire beam, depending on the option Depth measure.
|
See also
Use the following options to define beam location and dimensions:
|
Option |
See also |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
Parts tab
Use the Parts tab to define the plate properties.
|
Option |
Description |
Default |
|---|---|---|
|
t, b, h |
Define the thickness, width, and height of the part. |
|
|
Pos_No |
Define a prefix and a starting number for the part position number. Enter the assembly position number on the second row. |
The default part start number is defined in the Components settings in . |
|
Material |
Define the material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Define a name that is shown in drawings and reports. |
|
|
Finish |
Describes how the part surface has been treated. |
Welds
Click the link below to find out more: