Skip to main content

Tapered beam to tapered column (197)

Modified: 13 Jan 2021 Tekla Structures 2026
2026
Tekla Structures

Tapered beam to tapered column (197) creates a connection between a tapered beam and a tapered column.

Objects created

  • End plates (column top, beam flange)

  • Stiffeners (2 or 4)

  • Bolts

  • Welds

Use for

Situation Description

Connection is created using two stiffeners, and flange and column plates. Plates are connected with four bolts, but you can use any number of bolts.

Connection is created using four stiffeners and a column end plate. A separate plate for the beam flange is not created.

Before you start

  • Create a tapered beam.

  • Create a tapered column.

Selection order

  1. Select the flange of the main part (beam).

  2. Select the web of the secondary part (column).

    The connection is created automatically when the secondary part is selected.

Part identification key

Description

1

Column end plate

2

Beam flange end plate

3

Stiffener

Picture tab

Use Picture tab to define the dimensions of end plates and stiffeners, and the location of stiffeners.

Dimensions

Description

1

Beam end plate edge distance to the stiffener edge.

2

Distance between the stiffeners.

3

Stiffener dimension from the beam web.

4

Column end plate edge distance to the beam end plate edge.

5

Column end plate edge distance to the column edge.

Parts tab

Use the Parts tab to define the properties of the column end plate, the beam end plate, and the stiffeners.

Parts

Option Description

Beam plate

Thickness and width of the beam plate.

Column plate

Thickness and width of the column plate.

Stiffener

Thickness and width of the stiffener.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Parameters tab

Use the Parameters tab to define the plate and stiffener positions and orientation.

Plates

Option Description

End plate is created at the column end.

End plated is created at the column end and beam flange.

Stiffeners

Option Description

One stiffener is created.

Two stiffeners are created.

Column flange fit

Option Description

Column flange is fitted to be level with the end plate.

Column flange is perpendicular to the column axis.

Stiffener orientation

Option Description

Stiffener is parallel to the main part.

Stiffener is perpedicular to the beam.

Bolts tab

Use the Bolts tab to define the bolt group dimensions and bolt properties.

Bolt group dimensions

Description

1

Bolt edge distance.

Edge distance is the distance from the center of a bolt to the edge of the part.

2

Number of bolts.

3

Bolt spacing.

Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values.

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Slotted holes

Description

1

Vertical dimension of slotted hole.

2

Horizontal dimension of slotted hole.

Bolt assembly

The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.

If you want to create a hole only, clear all the check boxes.

To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.

Bolt length increase

Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.

General tab

Click the link below to find out more:

General tab

Analysis tab

Click the link below to find out more:

Analysis tab

Submit

Table of Contents